Material Insights · Understanding the Material World

X-ray apparatus: Footprint

Raw materials in one unit

Every commodity and chemical inside one unit, traced through its components by the site, with its emission factor and emissions

MaterialAmount (kg)Emission factor (kg CO2e per kg)Emissions (kg CO2e)
Steel9521.921827.8

Worked out from data

The site's estimate

Emissions of one unit worked out by the site from its materials and energy, for the world and India, with the share of mass covered by emission factors

StagePlaceEmissions (kg CO2e)Mass covered by factors
MakingWorld1828100%
UseWorld– –
MakingIndia1828100%
UseIndia– –

Worked out from data

End of life

What happens to a unit when it is thrown away: collection, reuse, recycling and disposal shares, by place

RouteSharePlaceYearSource
Recyclable as material, by weight (maker's declaration for the MULTIX Impact; a potential, not a measured rate)99.3World2022[3]
Usable for energy recovery, by weight (same declaration)0.7World2022[3]
Materials eligible to be recycled (GE HealthCare Definium Pace Select brochure)80World2023[11]
Compact mobile C-arm materials recyclable (GE HealthCare, up to)78World2025[12]
Compact mobile C-arms reused, refurbished or recycled (GE HealthCare, company figure)95World2025[12]
Refurbishment potential of an X-ray unit (MEPA Table 6 value; the report does not define the term)60World2022[4]

as of 2026-11-14

Recovered as

The commodities and chemicals recovered at end of life, with recovery rates

Recovered as
  • St Steel Recycling of the ferrous alloys, which are 80.4% of the system's weight [3] The maker declares 99.3% of the system recyclable by weight as material; no rate by metal was found [3].

as of 2026-11-14

End of life in India

Collection and recycling in India, including the informal sector

No source opened gives collection or recycling rates for X-ray machines, in India or worldwide, and none describes the informal sector or an Indian producer responsibility rule for them. Makers run take-back and refurbishment programmes [3][12], and GE HealthCare says parts of systems not fit for refurbishment are harvested for reuse after testing [12].

as of 2026-11-14

Sources

  1. MULTIX Impact | Environmental Product Declaration Siemens Healthcare GmbH (copy held on the Moldovan public procurement portal MTender; no copy found on Siemens Healthineers' own site), 2022
  2. Medical Imaging Equipment: State of Sustainability Research (final, 16 June 2022) Global Electronics Council for the Medical Equipment Proactive Alliance (MEPA), 2022, Table 6 and section 2
  3. Focusing on sustainability in X-ray solutions: Definium Pace Select (JB25106XX) GE HealthCare, 2023
  4. OEC One CFD: Compact mobile C-arm (JB33343XX) GE HealthCare, 2025