Activated sludge sewage treatment
Air bubbled through sewage feeds microbes that eat the pollution.
Building and shelter · Water and sanitation · No. 216
- Electrical and chemical age
- Readiness 9 of 9
- Process
Two Manchester chemists found in 1913 that sewage cleans itself faster if you keep yesterday's sludge and blow air through it.
Chart: Illustration: Activated sludge sewage treatment
Where it comes from
Chart: Map of where it comes from
Gilbert Fowler, chemist at Manchester's Davyhulme works, visited aeration trials in Massachusetts in 1912. His students Ardern and Lockett then aerated sewage in bottles in 1913 and announced in April 1914 that keeping the sludge was the key.
Three things to know
- The trick is to keep the settled microbes: reusing the sludge again and again cut the time needed to clean sewage to about a day, as Ardern and Lockett reported in 1914.
- Blowing in air is the main running cost: the US Department of Energy says aeration often takes more than half of an activated sludge plant's energy.
- In 2022, 42% of the world's household wastewater was still not safely treated before discharge.
The journey
- 1 SewerWastewater flows from homes and factories to the works
- 2 SettlingGrit and heavy solids settle out first
- 3 Aeration tankBlowers push air through the liquid and a floc of microbes eats the dissolved dirt
- 4 ClarifierThe floc settles; clean water flows over the top
- 5 ReturnMost of the settled sludge goes back to the tank; the surplus is treated and disposed of
- 6 RiverThe cleaned effluent is discharged or reused