Additive manufacturing (3D printing): Science
Principles
The science it rests on, with why each principle matters to it
Relies on- Macromolecules (polymer theory) Light-curing resins and printing plastics depend on small molecules linking into long chains, which turns liquid into solid [1, 8].
- Stimulated emission Stereolithography and powder-bed machines use lasers, light amplified by stimulated emission, to cure or melt each layer precisely [1].
- Heat conduction (Fourier's law) In powder melting, heat must flow away from each melted track before the next, which limits build speed and causes stresses in the part.
as of 2026-11-11
Discoveries
The discoveries that made it possible: when, by whom and what was found
| Year | Who | What |
|---|---|---|
| 1917 | Albert Einstein | Predicted stimulated emission, the principle of the laser [6] |
| 1922 | Hermann Staudinger and J. Fritschi | Proposed that polymers are giant molecules, the basis of plastics chemistry [8] |
| 1958 | Arthur Schawlow and Charles Townes | Set out the principle of the optical maser, the laser, in Physical Review [7] |
as of 2026-11-11
The science explained
The science behind it explained for a curious reader
Imagine building a loaf of bread by stacking its slices. Each slice is thin and flat, easy to cut to any outline, and together they make any shape, even one with tunnels inside. A 3D printer works the same way. In stereolithography, a liquid resin is made of small molecules that link into long chains when ultraviolet light strikes them, turning liquid into solid [1]. A laser, a beam of light made by stimulated emission, which Einstein predicted in 1917 [6], draws one slice on the resin surface. The part moves down a fraction of a millimetre and the next slice is drawn on top, bonding to the one below.
as of 2026-11-11
Sources
- Stereolithography: The First 3D Printing Technology (ASME landmark 261) American Society of Mechanical Engineers, 2016
- Einstein predicts stimulated emission APS News, American Physical Society, 2005
- This Month in Physics History: December 1958 American Physical Society, APS News, 2003
- Hermann Staudinger Encyclopaedia Britannica