Material Insights · Understanding the Material World

Anti-lock braking

Sensors and valves pulse the brakes so wheels do not lock and the driver can steer.

Moving people and goods · Road · No. 241

  • Electronic age
  • Readiness 9 of 9
  • System
Moving people and goods · Technology

A locked wheel cannot steer: ABS releases and reapplies the brakes in rapid pulses so the car stays steerable.

Chart: Illustration: Anti-lock braking

Where it comes from

Chart: Map of where it comes from

Anti-skid brakes were first fitted to aircraft in the late 1940s. The Jensen FF brought a mechanical system to cars in 1966; Chrysler and Bendix offered an electronic four-wheel system in 1971, and Bosch and Mercedes-Benz a digital one in 1978.

Three things to know
  1. ABS began on aircraft: anti-skid brakes appeared there in the late 1940s, and the Jensen FF brought a mechanical version to cars in 1966.
  2. By 1990 about six million vehicles worldwide had Bosch ABS.
  3. A 2009 NHTSA study found ABS cut non-fatal crashes of US cars by 6% but raised fatal run-off-road crashes by 9%.
The journey
  1. 1 SensorsA toothed ring and magnetic sensor at each wheel measure its speed
  2. 2 Control unitA small computer compares wheel speeds and spots a wheel about to lock
  3. 3 ValvesSolenoid valves hold, release or rebuild brake pressure at that wheel
  4. 4 PumpA pump returns brake fluid so pressure can rise again
  5. 5 DriverKeeps steering while braking hard
Covered in Force, motion and energy: the laws every machine obeysEngineeringControl and systems: feedback, stability and how machines are made to behaveEngineering
Go deeper pick a tab to open it in full