Cemented carbide: Overview
What it does
The job the technology does for people, in a short paragraph
Cemented carbide, or hardmetal, holds fine grains of tungsten carbide in a metal binder, usually cobalt [1][2]. Karl Schröter of Osram filed the first patent in 1923, and the material was shown as a tool material in 1927 [1]. It lets machines cut steel almost four times faster than high-speed steel tools [1], and it takes about 60% of the tungsten used in the United States [4].
as of 2026-11-12
How it works
The working principle in plain words, step by step
Tungsten carbide is a ceramic: its grains are very hard but brittle, so a tool made of it alone would shatter [2]. Cobalt is a metal that can bend a little before it breaks [2]. Mixing fine carbide powder with cobalt powder, pressing it into shape and heating it combines the two [3]. The heating, called sintering, is done just above the temperature at which part of the mixture turns liquid [3]. The liquid binder fills the gaps between the grains, and the part must end up fully dense [3]. On cooling, a skeleton of hard grains is cemented in a tough metal matrix: the grains do the cutting and the binder lets the material take damage without breaking [2].
as of 2026-11-12
Key figures
The handful of numbers that size it up, each with its unit, year and source
| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Share of US tungsten consumption used in cemented carbide parts | 60 | % | 2026 | [4] |
| Share of US cobalt consumption used in cemented carbides | 9 | % | 2025 | [5] |
| Share of world tungsten output used to make tungsten carbide | 55 | % | 1997 | [8] |
| Typical cobalt binder content, upper end of range | 18 | wt% | 2020 | [3] |
| Steel cutting speed made possible by carbide tools | 150 | m/min | 2023 | [1] |
| World tungsten mine production | 85 | thousand t | 2025 | [4] |
as of 2026-11-12. The US tungsten share is from the USGS 2026 summary, which gives no data year, so the publication year is shown; the cobalt share is a 2025 estimate [4][5]. The world tungsten share is from a 1997 paper, its publication year [8]. The binder range is 6 to 18 wt% cobalt, or 10 to 30% by volume, and 2020 is the article's publication year [3]. The cutting speed describes the carbide tools of the 1920s; 2023 is the article's publication year, not the data year [1].
Where it is used
The main places and products the technology is found in
- Cutting, machining and forming tools [2]
- Metalworking inserts and drills [1][4]
- Mining, construction and oil and gas drilling bits [4]
as of 2026-11-12
Scale today
How much of it there is now: units in use, made each year and who uses it
- Made per year
- No source gives world hardmetal output; about 60% of US tungsten use goes into cemented carbide parts [4]
- Unit
- t of tungsten
- Year
- 2025
- Note
- World tungsten mining was about 85 thousand t in 2025 [4], most of it bound for carbides.
Indicative · as of 2026-11-12
Sources
- Celebrating a century of cemented carbide use in tooling Cutting Tool Engineering (news item on Sandvik Coromant), 2023
- Nanomechanical behaviour of individual phases in WC-Co cemented carbides, from ambient to high temperature (De Luca and others) University of Strathclyde (Strathprints, author's copy)
- Additive Manufacturing of hardmetals: An evaluation of potential processes for tool production (Johannes Pötschke) Metal AM magazine, Vol. 6 No. 3, 2020
- Tungsten, Mineral Commodity Summaries 2026 U.S. Geological Survey, 2026
- Mineral Commodity Summaries 2026: Cobalt US Geological Survey, 2026
- 1996: Centenaire de la découverte du carbure de tungstène par Henri Moissan; historique du développement de ce matériau (H. Pastor) Revue de Métallurgie, vol. 94, no. 12, EDP Sciences, 1997