Material Insights · Understanding the Material World

Cemented carbide: Science

Principles

The science it rests on, with why each principle matters to it

Relies on
  • Dislocations in crystals The cobalt binder is fairly ductile and lets the material take damage [2]; metals deform this way because dislocations can move through them [7].
Limited by
  • Fracture mechanics Carbide grains are brittle ceramics [2], so the material's toughness, its resistance to cracks, sets how hard a tool can be pushed; Griffith's 1921 theory explains strength through the flaws a material holds [11].

as of 2026-11-12

Discoveries

The discoveries that made it possible: when, by whom and what was found

YearWhoWhat
1896Henri MoissanDiscovered tungsten carbide, the hard phase of cemented carbide [8]
1921Alan Arnold GriffithShowed that inherent flaws, later called Griffith cracks, govern the strength of brittle materials [11]
1934Egon Orowan, Geoffrey Taylor and Michael PolanyiIndependently put forward the dislocation, the defect that lets metals such as the cobalt binder deform [7]

as of 2026-11-12

The science explained

The science behind it explained for a curious reader

Picture a dry-stone wall versus a concrete one. Loose hard stones are strong under load but fall apart when knocked. Fill the gaps with mortar and the wall can take a blow. Cemented carbide works the same way. Tungsten carbide grains are the stones: very hard, but brittle ceramics [2]. Cobalt is the mortar, a metal whose atoms can slip past each other along defects called dislocations, an idea put forward in 1934 [7]. That slipping lets the binder absorb energy and stop cracks [2]. More cobalt makes a tougher, less hard tool; less cobalt makes a harder, more brittle one, which is why grades range from about 6 to 18% cobalt by weight [3].

as of 2026-11-12

Sources

  1. Nanomechanical behaviour of individual phases in WC-Co cemented carbides, from ambient to high temperature (De Luca and others) University of Strathclyde (Strathprints, author's copy)
  2. Additive Manufacturing of hardmetals: An evaluation of potential processes for tool production (Johannes Pötschke) Metal AM magazine, Vol. 6 No. 3, 2020
  3. 22.1: Introduction (Introduction to Dislocations) DoITPoMS (University of Cambridge), on Engineering LibreTexts (TLP Library I)
  4. 1996: Centenaire de la découverte du carbure de tungstène par Henri Moissan; historique du développement de ce matériau (H. Pastor) Revue de Métallurgie, vol. 94, no. 12, EDP Sciences, 1997
  5. The phenomena of rupture and flow in solids Royal Society (blog by Professor John Knott FRS), 2015