Material Insights · Understanding the Material World

Numerical control machining: Materials

Materials it needs

The commodities and chemicals it needs per unit, its share of each one's demand and how critical each is

Needs 5
  • St Steel criticality low Machine beds, slides, ball screws and spindles are made of cast iron and steel.
  • W Tungsten criticality high Many cutting tools are tungsten carbide; tungsten is on the EU critical and strategic lists [7].
  • Co Cobalt criticality high Cobalt binds the carbide grains of cutting tools and is on the EU critical and strategic lists [7].
  • Cu Copper criticality medium Servo motors and wiring use copper, which is on the EU critical and strategic lists [7].
  • REE Rare earths criticality high Many servo motors use rare earth permanent magnets; rare earths for magnets are an EU strategic material, and light and heavy rare earths are EU critical materials [7].
Processes
  • Al Aluminium criticality low Aluminium parts for aircraft and cars are among the main work machined.

as of 2026-11-11. No source opened gives material amounts per machine; criticality is the writer's judgement from the EU lists [7].

Critical materials

The materials whose supply could hold it back

  • Tungsten: the main element of carbide cutting tools, on both the EU critical and strategic raw material lists [7].
  • Cobalt: the binder in carbide tools, also on both EU lists [7].
  • Rare earths for magnets: an EU strategic raw material, used in the servo motors that move the axes [7].

as of 2026-11-11

Sources

  1. RMIS - Critical and Strategic Materials European Commission, Joint Research Centre, Raw Materials Information System