Numerical control machining: Overview
What it does
The job the technology does for people, in a short paragraph
Numerical control steers a machine tool by numbers instead of a machinist's hands: a program sets where each axis moves and how fast [1]. It cuts complex shapes accurately and repeats them exactly. The first numerically controlled machine tool was shown at MIT in 1952 [1]; commercial machines followed in 1955 [3], and built-in computers made it CNC in the 1970s [3].
as of 2026-11-11
How it works
The working principle in plain words, step by step
A part is first described as geometry: points, lines, arcs and surfaces. Software, or in early days a language such as APT [1], turns that shape into a list of moves for each axis, with speeds and tool changes. The controller reads the list one step at a time. For each axis it sends a command to a motor that turns a screw and moves the table or spindle. A sensor measures where the axis actually is, and the controller corrects any difference at once. This loop of command, measure and correct runs many times a second on every axis together, so the tool follows a smooth path through the metal. Changing the part means loading a new program, not rebuilding the machine.
as of 2026-11-11
Key figures
The handful of numbers that size it up, each with its unit, year and source
| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Numerically controlled share of Japan's machine tool production, by value | 93.5 | % | 2024 | [9] |
| Value of Japan's numerically controlled machine tool production | 843.1 | billion JPY | 2024 | [9] |
| China's share of world machine tool production | 37 | % | 2025 | [5] |
| Value of China's machine tool production | 30 | billion EUR | 2025 | [5] |
as of 2026-11-11. JMTBA's NC ratio is the value of numerically controlled machines as a share of all machine tools Japan made in 2024 [9]. The VDW shares are of world machine tool production; the release on 2025 output does not say whether by value or units, and the share sentence itself states no year [5].
Where it is used
The main places and products the technology is found in
- Machining centres and lathes in engineering workshops
- Engine, gearbox and body parts for cars
- Aircraft structures and turbine parts
- Moulds and dies for plastics and metal forming
- Laser, plasma and water-jet cutters and routers
as of 2026-11-11
Scale today
How much of it there is now: units in use, made each year and who uses it
- Made per year
- Japan made numerically controlled machine tools worth 843.1 billion yen, 93.5% of its machine tool output by value [9]
- Unit
- JPY of numerically controlled machine tools
- Year
- 2024
- Note
- No world count of numerically controlled machines was found; China, the largest producer, made machine tools worth about 30 billion euros in 2025, 37% of world production [5].
as of 2026-11-11
Sources
- Automation: Development of robotics Encyclopaedia Britannica
- 60 years of challenge and change American Machinist, 1998
- German machine tool industry leveling off: China further dominating production VDW (German Machine Tool Builders' Association), press release, 2026
- Machine Tool Industry Japan 2025 Japan Machine Tool Builders' Association, 2025