Material Insights · Understanding the Material World

Drip irrigation

Water is dripped through emitters to each plant's roots, using far less than flooding.

Food and farming · Soil and water · No. 166

  • Electronic age
  • Readiness 9 of 9
  • System
Food and farming · Technology

A leaking pipe that kept one tree green in a dry yard gave an Israeli engineer the idea of feeding plants drop by drop.

Chart: Illustration: Drip irrigation

Where it comes from

Chart: Map of where it comes from

Simcha Blass, a water engineer in Israel, built a first experimental drip system in 1959. In 1965 he and Kibbutz Hatzerim set up the firm Netafim, whose name means drops of water, and production began in 1966.

Three things to know
  1. A drip emitter releases only about 2 to 20 litres of water an hour, wetting the soil just around the roots.
  2. Drip became workable on a large scale only with polyethylene, developed during and after the Second World War.
  3. Drip systems are dear to install, about 1,200 to 2,500 US dollars a hectare, so they are used mostly on high-value crops.
The journey
  1. 1 SourceA pump draws water from a well, canal or tank and sets the pressure
  2. 2 FilteringSand and screen filters take out particles that would block emitters
  3. 3 FertiliserA dosing tank can add measured fertiliser to the water
  4. 4 PipesPVC or polyethylene mains feed thin lateral lines along each crop row
  5. 5 EmittersDrippers release water slowly onto the soil beside each plant
Covered in What engineers do: rules of thumb, the method and the kinds of engineering knowledgeEngineering
Go deeper pick a tab to open it in full