Thermochemical biomass conversion: Energy footprint
Energy in use
The energy it uses or converts while it works, and how efficiently
- Consumption
- Dried biomass, plus process heat, usually from burning the char and gas made in the process
- Conversion
- Chemical energy of biomass into gas, liquid or char fuels
- Efficiency
- 75
- Unit
- % of dry feed mass to liquid, fast pyrolysis (a mass yield, not an energy efficiency)
- Note
- Gasification turns about 85% of the mass into gas [3]; bio-oil has about half the heating value of fuel oil [4].
as of 2026-11-11
Energy links
The energy sources and technologies it uses, holds, converts, loses or gets back
Consumes- Bm Biomass Wood, straw and other residues are the feedstock.
- Ht Heat The reactor must be held at about 290 to 800 °C depending on the route [3].
- BmS Biomass and biofuel stores Bio-oil, char and torrefied pellets store biomass energy in denser, more stable forms.
as of 2026-11-11
Sources
- Fast pyrolysis: key points (table of product yields by pyrolysis mode) IEA Bioenergy Task 34 (Direct Thermochemical Liquefaction)
- Pyrolysis Explained IEA Bioenergy Task 34 (Direct Thermochemical Liquefaction)