Material Insights · Understanding the Material World

Geothermal direct use and ground-source heat pumps: Evolution

Timeline

The milestones from first idea to today

YearMilestone
-300The oldest known hot spring pool is built in China, in the 3rd century BC (year approximate) [1]
1330Chaudes-Aigues in France starts using its hot spring water for heating, in the 14th century (year approximate) [1]
1892Boise, Idaho, pipes water from hot springs to town buildings, which the US DOE calls the world's first district heating system [4]
1948Carl Nielsen of Ohio State University builds a ground-source heat pump for his home, and J.D. Krocker first uses a groundwater heat pump in a commercial building in Portland, Oregon [4]
2020Installed direct-use capacity reaches about 107 GW worldwide, 59% of it in ground-source heat pumps [2]

as of 2026-11-11

Lineage

The technologies it came from and the ones that came from it

Builds on Works with

as of 2026-11-11

Sources

  1. Geothermal Page 2 Environmental Literacy and Inquiry Working Group, Lehigh University
  2. Direct Utilization of Geothermal Resources World Bank, Energy Sector Management Assistance Program (ESMAP), 2022, Technical Report 021/22 (printed "Technical Report 21/22" on the cover); executive summary and chapter 1
  3. A History of Geothermal Energy in America US Department of Energy, Geothermal Technologies Office (archived copy, UNT Libraries web archive, captured 21 December 2020)