Material Insights · Understanding the Material World

Energy-intensive industry: Overview

What it does

The job the technology does for people, in a short paragraph

Heavy industry turns ores, rock, gas and salt into the bulk materials of modern life: steel, cement, aluminium, ammonia, chlorine and paper. It needs huge amounts of heat and energy to break chemical bonds. Coke ironmaking began in 1709 [1]. The IEA put industry at about one third of world energy use and almost 40% of CO2 emissions [6]; the world made 1,849 Mt of steel in 2025 [3].

as of 2026-11-10

How it works

The working principle in plain words, step by step

Energy does two jobs in these plants. The first is heat: furnaces and kilns run far hotter than any boiler, to melt steel or to fire limestone and clay into cement clinker. The second is chemistry. Most metals sit in ore bound to oxygen, and pulling it off takes a fixed amount of energy. In a blast furnace, carbon from coke grabs the oxygen from iron ore and leaves as carbon dioxide. Aluminium and chlorine are split out by electricity in electrolysis cells instead. Cement kilns drive carbon dioxide out of limestone itself, so they emit it whatever the fuel. Ammonia plants make hydrogen, mostly from natural gas, and join it to nitrogen from the air over a catalyst at high pressure.

as of 2026-11-10

Key figures

The handful of numbers that size it up, each with its unit, year and source

FigureValueUnitYearSource
World crude steel production1849.4Mt2025[3]
Average energy used to make a tonne of steel (all routes)20.95GJ/t2024[2]
World cement production4160Mt2022[4]
Kiln heat per tonne of cement clinker, world average3.6GJ/t2022[4]
Share of world final energy used to make ammonia2%– [5]

as of 2026-11-10. The IEA ammonia page gives no date, so the ammonia share has no year.

Where it is used

The main places and products the technology is found in

  • Integrated steelworks with blast furnaces and oxygen converters
  • Electric arc furnace mini-mills melting scrap and direct reduced iron
  • Cement plants with rotary kilns
  • Aluminium smelters next to cheap power
  • Ammonia and chlor-alkali chemical plants
  • Pulp and paper mills

as of 2026-11-10

Scale today

How much of it there is now: units in use, made each year and who uses it

Made per year
1,849 Mt of crude steel (2025) [3] and 4,160 Mt of cement (2022) [4]
Users
industry as a whole uses about one third of world energy (an older IEA report) [6]
Unit
tonnes of material made per year
Year
2025
Note
The two largest bulk materials by tonnage are counted; aluminium, ammonia, chlorine and paper add much smaller tonnages. The one-third share is from an undated IEA report that builds on Energy Technology Perspectives 2008, and covers all industry, not only these sectors.

as of 2026-11-10

Sources

  1. Coalbrookdale's Old Furnace presented with 100th Engineering Heritage Award Institution of Mechanical Engineers, 2014
  2. Energy use in the steel industry (fact sheet) World Steel Association, 2025
  3. December 2025 crude steel production and 2025 global crude steel production totals World Steel Association, 2026
  4. Cement (tracking report) IEA, 2023
  5. New IEA study examines the future of the ammonia industry amid efforts to reach net zero emissions International Energy Agency
  6. Energy Technology Transitions for Industry International Energy Agency