Material Insights · Understanding the Material World

Energy-intensive industry: Science

Principles

The science it rests on, with why each principle matters to it

Limited by Relies on
  • First law of thermodynamics Energy balances of furnaces and kilns show where heat goes and how much can be recovered.
  • Faraday's laws of electrolysis Aluminium and chlorine are made by electrolysis, where the charge needed per tonne is fixed by Faraday's laws.
  • Catalysis Iron catalysts let hydrogen and nitrogen combine into ammonia at a practical rate.

as of 2026-11-10

Discoveries

The discoveries that made it possible: when, by whom and what was found

YearWhoWhat
1709Abraham DarbyShowed that coke made from coal could replace charcoal for smelting iron [1]
1827Friedrich WöhlerIsolated the element aluminium [10], decades before a cheap way to make it was found [7]
1886Charles Martin HallMade pure aluminium by electrolysis of a molten fluoride bath [7]

as of 2026-11-10

Physical limits

The limits nature sets, today's best and how far there is still to go

LimitUnitBest todayGap
Chemical minimum energy to reduce iron ore to ironGJ/tWorld average 20.95 GJ per tonne of steel across all routes in 2024 [2]Furnace heat losses, coke making and rolling add to the chemical minimum; recycling scrap avoids the reduction step
Heat to drive carbon dioxide out of limestone and form clinkerGJ/tWorld average kiln heat 3.6 GJ per tonne of clinker in 2022 [4]The IEA's net zero pathway aims for 2.9 GJ/t by 2050 [4]; the calcination emissions remain whatever the fuel

as of 2026-11-10

The science explained

The science behind it explained for a curious reader

Think of an ore as a metal locked to oxygen. Rust is iron that has found its partner, and nature is happy to keep it that way. To get the iron back you must pay at least the energy that was released when it rusted. A blast furnace pays with carbon: coke burns to make heat and also pulls the oxygen off the iron. Aluminium holds its oxygen far more tightly, so it is split with electricity, which Hall first did in 1886 [7]. Cement works in a different way: heat drives carbon dioxide out of limestone. These chemical costs set floors that no amount of good engineering can dig under. Steelmakers have cut their average energy from about 50 GJ per tonne in the 1960s to 20.95 GJ in 2024 [2].

as of 2026-11-10

Sources

  1. Coalbrookdale's Old Furnace presented with 100th Engineering Heritage Award Institution of Mechanical Engineers, 2014
  2. Energy use in the steel industry (fact sheet) World Steel Association, 2025
  3. Cement (tracking report) IEA, 2023
  4. Scientist of the day: Charles Martin Hall Linda Hall Library
  5. Wöhler, Friedrich Encyclopedia.com (Chemistry: Foundations and Applications)