Energy-intensive industry: Energy footprint
Energy in use
The energy it uses or converts while it works, and how efficiently
- Consumption
- Coal and coke, natural gas, electricity and, in cement, waste fuels
- Conversion
- Fuel and electricity to high-temperature heat and to the chemical work of reducing ores and making ammonia and chlorine
- Unit
- GJ per tonne of product
- Note
- Left without a single efficiency: steel, cement, aluminium and chemicals have no common measure, so energy per tonne is given instead. Steel took 20.95 GJ per tonne on average in 2024 [2], with coal 70 to 80% of the energy in the blast furnace route [2]; cement kilns used 3.6 GJ per tonne of clinker in 2022 [4].
as of 2026-11-10
Energy links
The energy sources and technologies it uses, holds, converts, loses or gets back
Consumes- CM Coal mining Coal supplies 70 to 80% of the energy in blast furnace steelmaking [2].
- GP Gas pipelines and city gas Gas fuels ammonia plants, direct reduction and many kilns and furnaces.
- El Electricity Aluminium smelters, chlor-alkali cells and arc furnaces run on electricity.
- Ht Heat Hot gases, slag and products carry away much of the energy put in.
- CDQ Steel plant energy recovery Steelworks reuse furnace gases and hot exhaust to make power and preheat air.
as of 2026-11-10
Sources
- Energy use in the steel industry (fact sheet) World Steel Association, 2025
- Cement (tracking report) IEA, 2023