Material Insights · Understanding the Material World

Solar fuels and photosynthesis: Overview

What it does

The job the technology does for people, in a short paragraph

Solar fuels would store sunlight in chemical bonds, as leaves do, by splitting water into hydrogen or turning carbon dioxide into liquid fuels. Unlike electricity, a fuel can be stored and shipped, and burnt in engines and aircraft. The idea took off with a 1972 paper on splitting water with light [1]. It is still at laboratory and pilot stage, with no commercial plants [2][4].

as of 2026-11-11

How it works

The working principle in plain words, step by step

There are two main routes. In a photoelectrochemical cell, a semiconductor that absorbs sunlight sits in water. Light frees electrons, and catalysts on its surfaces use them to split water: hydrogen bubbles off one face and oxygen off the other [2]. The best devices stack two semiconductor layers to capture more of the spectrum and coat them with a thin protective layer of titanium dioxide and a catalyst of rhodium particles [2]. In the thermal route, a solar reactor uses sunlight to split carbon dioxide and water, both drawn from the air, into syngas, a mix of hydrogen and carbon monoxide, which is then processed into kerosene or methanol [4]. Natural photosynthesis does a similar job in leaves, but stores only a few per cent of the sunlight [5].

as of 2026-11-11

Key figures

The handful of numbers that size it up, each with its unit, year and source

FigureValueUnitYearSource
Best solar-to-hydrogen efficiency of a direct water-splitting device, acidic electrolyte19.3%2018[2][3]
Previous record of the same research group14%2015[2]
Theoretical maximum of C3 photosynthesis, sunlight to biomass4.6%2008[5]
Theoretical maximum of C4 photosynthesis, sunlight to biomass6%2008[5]

as of 2026-11-11. The 19.3% device was announced in July 2018 and published in ACS Energy Letters [2][3]. The 2015 cell reached 'over 14 per cent' [2]. The photosynthesis limits carry 2008, the publication year of the review [5], not a data year.

Where it is used

The main places and products the technology is found in

  • Laboratory water-splitting cells in university and national research labs [2]
  • Small demonstration plants making syngas, kerosene and methanol from sunlight and air [4]
  • Planned sources of carbon-neutral aviation fuel [4]

as of 2026-11-11

Scale today

How much of it there is now: units in use, made each year and who uses it

Installed
No commercial plants; laboratory devices and small demonstration plants [2][4]
Users
Research groups and start-ups; aviation is the main target market [4]
Note
Fuel for all of aviation could in principle be made on less than one percent of the world's arid land [4].

as of 2026-11-11

Sources

  1. Electrochemical Photolysis of Water at a Semiconductor Electrode (A. Fujishima and K. Honda, Nature 238, 37-38) Nature (Springer Nature), 1972
  2. New world record for direct solar water-splitting efficiency Fraunhofer Institute for Solar Energy Systems ISE, 2018
  3. Monolithic Photoelectrochemical Device for Direct Water Splitting with 19% Efficiency (Cheng, Richter, May, Ohlmann, Lackner, Dimroth, Hannappel, Atwater and Lewerenz; ACS Energy Letters) American Chemical Society (archived by the UNT Libraries web archive)
  4. Making Aircraft Fuel From Sunlight and Air University of Potsdam, 2021
  5. What is the maximum efficiency with which photosynthesis can convert solar energy into biomass? (Zhu, Long and Ort, Current Opinion in Biotechnology 19) University of Illinois / Elsevier, 2008