Material Insights · Understanding the Material World

Solar fuels and photosynthesis: Science

Principles

The science it rests on, with why each principle matters to it

Limited by
  • Photosynthesis Leaves are the model, but they convert at most 4.6% (C3 plants) or 6% (C4 plants) of sunlight into biomass [5], which artificial systems aim to beat.
Relies on
  • Band theory of solids The semiconductor's band gap decides which light it absorbs; record devices stack two III-V semiconductors in a tandem cell [2].
  • Faraday's laws of electrolysis Freed electrons split water at the electrode surfaces, hydrogen forming on one side and oxygen on the other [2].
  • Catalysis Catalysts such as rhodium nanoparticles speed up the reactions at the surface [2].

as of 2026-11-11

Discoveries

The discoveries that made it possible: when, by whom and what was found

YearWhoWhat
1779Jan IngenhouszShowed that plants need light to restore the air, the first step to understanding photosynthesis [6]
1972Akira Fujishima and Kenichi HondaReported that a lit titanium dioxide electrode in water splits it into hydrogen and oxygen [1][7]
2008Xin-Guang Zhu, Stephen Long and Donald OrtCalculated the highest share of sunlight photosynthesis can store in biomass [5]

as of 2026-11-11

Physical limits

The limits nature sets, today's best and how far there is still to go

LimitValueUnitBest todayGap
Maximum efficiency of natural photosynthesis (C4 plants)6%Laboratory water-splitting device 19.3% solar-to-hydrogen [3]Laboratory devices already beat leaves about threefold (calculated), but use costly materials and small areas

as of 2026-11-11. The C3 limit is 4.6% at 30 °C and today's carbon dioxide level [5].

The science explained

The science behind it explained for a curious reader

Water does not fall apart in sunlight, because water is transparent to visible light and cannot absorb its energy [1]. A semiconductor can. When it absorbs a photon, an electron is lifted into a higher energy level and leaves a gap behind. If the semiconductor sits in water, the energetic electron can help turn water into hydrogen at one surface while the gap pulls electrons from water at another, releasing oxygen. Fujishima and Honda showed this with titanium dioxide [1][7], which only absorbs ultraviolet light. Modern devices use better absorbers and catalysts and reach 19.3% [3]. Leaves do something similar with chlorophyll, but store at most 4.6 to 6% of sunlight as biomass [5].

as of 2026-11-11

Sources

  1. Electrochemical Photolysis of Water at a Semiconductor Electrode (A. Fujishima and K. Honda, Nature 238, 37-38) Nature (Springer Nature), 1972
  2. New world record for direct solar water-splitting efficiency Fraunhofer Institute for Solar Energy Systems ISE, 2018
  3. Monolithic Photoelectrochemical Device for Direct Water Splitting with 19% Efficiency (Cheng, Richter, May, Ohlmann, Lackner, Dimroth, Hannappel, Atwater and Lewerenz; ACS Energy Letters) American Chemical Society (archived by the UNT Libraries web archive)
  4. What is the maximum efficiency with which photosynthesis can convert solar energy into biomass? (Zhu, Long and Ort, Current Opinion in Biotechnology 19) University of Illinois / Elsevier, 2008
  5. Jan Ingenhousz Encyclopaedia Britannica
  6. Artificial photosynthesis: Japan's research to tackle climate change KIZUNA, Government of Japan (japan.go.jp), 2021