Gypsum plasterboard
Gypsum plaster sandwiched in paper gives quick, fire-resistant walls and ceilings.
Building and shelter · Construction methods · No. 438
- Second industrial revolution
- Readiness 9 of 9
- Component
A wall board that holds about a fifth of its weight as water fights fire by slowly turning it to steam.
Chart: Illustration: Gypsum plasterboard
Where it comes from
Chart: Map of where it comes from
Augustine Sackett and Fred Kane first made board from plaster and felt paper in 1888, after a failed try with straw paper and tar. Sackett patented the process in 1894.
Three things to know
- Sackett Board of 1888 was plaster of Paris between layers of felt paper, made as a base for wet plaster.
- By 1945 the US military had used about 2.5 billion square feet of gypsum board.
- In 2025 about 39% of US gypsum supply was synthetic, mostly from cleaning the flue gas of coal power stations.
The journey
- 1 GypsumMined rock, or synthetic gypsum from power-station flue gas cleaning
- 2 CalciningHeating drives off most of the water to make plaster powder
- 3 SlurryThe powder is mixed back with water
- 4 Board lineThe slurry is spread between two sheets of paper and sets
- 5 DryingBoards are cut and dried, then fixed to walls and ceilings