Material Insights · Understanding the Material World

Gypsum plasterboard: Overview

What it does

The job the technology does for people, in a short paragraph

Plasterboard gives buildings flat, fire-resistant inner walls and ceilings without weeks of wet plastering. Boards are screwed or nailed to a frame and the joints are filled. Sackett first made it in 1888 as a base for plaster [2], and by 1916 it had become a ready-to-finish panel [2]. In 2025 US sales alone were about 26 billion square feet [3].

as of 2026-11-11

How it works

The working principle in plain words, step by step

Gypsum is calcium sulphate bound up with water. Heating it drives most of that water off and leaves a fine powder, plaster of Paris. Mixed with water again, the powder dissolves and new interlocking crystals of gypsum grow, so the paste sets hard [6, 8]. A board line feeds this wet paste continuously between two sheets of paper, where it sets [8]. The paper holds the soft core together and gives a smooth face for paint. In a fire, the heat must first drive the water back out of the gypsum. The board gives off steam, and heat is held back from the far side until that water is gone [4].

as of 2026-11-11

Key figures

The handful of numbers that size it up, each with its unit, year and source

FigureValueUnitYearSource
Wallboard sales in the United States26billion square feet2025[3]
US gypsum panel production capacity34billion square feet per year2025[3]
World gypsum mine production160million tonnes2025[3]
Synthetic gypsum's share of US gypsum supply39%2025[3]
Chemically combined water in gypsum21% by weight– [4]

as of 2026-11-11. US figures are USGS estimates; the capacity is for the start of 2025 [3]. Mine output counts all uses of gypsum, including cement and farming.

Where it is used

The main places and products the technology is found in

  • Interior walls and partitions in homes and offices
  • Ceilings
  • Fire-rated linings around stairs, shafts and escape routes
  • Linings in high-rise towers, such as Chicago's Willis Tower and Boston's John Hancock Tower

as of 2026-11-11

Scale today

How much of it there is now: units in use, made each year and who uses it

Made per year
About 26 billion square feet of wallboard sold in the United States [3]
Unit
square feet
Year
2025
Note
No opened source gives world board output; world gypsum mine output was about 160 million tonnes in 2025 [3].

as of 2026-11-11

Sources

  1. A Brief History of Gypsum Board in North America (Michael Gardner, 1 December 2005) Walls & Ceilings, 2005
  2. Mineral Commodity Summaries 2026: Gypsum USGS, 2026
  3. Why Gypsum? Gypsum Association
  4. The Manufacture And Use Of Plaster Of Paris (Scientific American Supplement) Chest of Books
  5. Plaster and plaster board production New Zealand Institute of Chemistry