Gypsum plasterboard: Science
Principles
The science it rests on, with why each principle matters to it
Relies on- Hydraulic setting of lime and cement Plaster sets when the dried powder takes back its water and grows a mesh of gypsum crystals [6], which binds the board's core.
- Latent heat In a fire the bound water must be driven off as steam before the core heats up, which delays heat passing through the board [4].
as of 2026-11-11
Discoveries
The discoveries that made it possible: when, by whom and what was found
| Year | Who | What |
|---|---|---|
| 1762 | Joseph Black | Gave the first account of latent heat: heat taken up when water changes state without a rise in temperature [9] |
| 1765 | Antoine Lavoisier | Reported to the Paris Academy that gypsum loses water when heated and takes it back as it sets [7] |
| 1887 | Henry Le Chatelier | Published one of the first full theories of how binders set: the powder dissolves and new crystals precipitate from the solution [5] |
as of 2026-11-11. Black's latent heat explains the fire resistance, Lavoisier's work the setting of plaster, and Le Chatelier's the crystal growth that binds the core.
The science explained
The science behind it explained for a curious reader
Picture gypsum as a sponge that holds water inside its crystals rather than in its holes. About a fifth of its weight is this bound water [4]. Bake it and the water leaves, turning the rock into a powder, plaster of Paris. Add water and the powder dissolves, then gypsum crystals grow again and lock together like a felt of needles, so the paste turns solid [8]. Lavoisier showed in the 1760s that baking only removes water and setting puts it back [6, 7]. The same water makes the board slow to burn through. Heat arriving at the board is spent turning the water to steam, so the far side stays cool while the process lasts [4].
as of 2026-11-11
Sources
- Why Gypsum? Gypsum Association
- Cement hydration mechanisms through time - a review (John and Lothenbach), Journal of Materials Science 58, 9805 to 9833 Springer, 2023
- The Manufacture And Use Of Plaster Of Paris (Scientific American Supplement) Chest of Books
- Lavoisier Antoine Laurent (1743-1794): carrière administrative et premiers travaux scientifiques (Arthur Birembaut) Encyclopædia Universalis
- Plaster and plaster board production New Zealand Institute of Chemistry
- April 23, 1762: Joseph Black and Latent Heat American Physical Society, APS News, 2012