Material Insights · Understanding the Material World

High-pressure polyethylene process: Science

Principles

The science it rests on, with why each principle matters to it

Relies on
  • Macromolecules (polymer theory) Polyethylene is a giant chain molecule built from ethylene units; Staudinger proposed in 1922 that polymers are giant molecules [5].
Limited by
  • Combustion chemistry Oxygen starts the chains, but at 2% or more the ethylene mixture explodes, so the oxygen must be kept to a trace [1].

as of 2026-11-11

Discoveries

The discoveries that made it possible: when, by whom and what was found

YearWhoWhat
1922Hermann Staudinger and J. FritschiPolymers are giant molecules [5]
1933Reginald Gibson and Eric Fawcett, ICIEthylene under very high pressure forms a waxy solid polymer [1][2]
1935ICI team reviewing the 1933 work under research director Michael PerrinA trace of oxygen makes the polymerisation start reliably [1]

as of 2026-11-11

The science explained

The science behind it explained for a curious reader

Think of ethylene molecules as people each holding a spare hand behind their back. On their own they drift about as a gas. Squeeze them hard enough and they crowd together; then add a tiny spark of reactivity, a free radical made from a trace of oxygen [1]. The radical grabs one person's spare hand, who grabs the next, and a human chain races through the crowd. At such high pressure the chains also grab hold of each other's sides and sprout branches [3]. A branched chain cannot fold neatly against its neighbours, so the solid stays loose, light and flexible. Too much oxygen, though, and the mixture explodes instead [1].

as of 2026-11-11

Sources

  1. Dermot Manning and colleagues at ICI - Plastic Fantastic The Chemical Engineer, IChemE (Claudia Flavell-While), 2011
  2. Polyethylene: discovered by accident 75 years ago ICIS (Anna Jagger), 2008
  3. Low-density polyethylene Encyclopaedia Britannica
  4. Hermann Staudinger Encyclopaedia Britannica