Material Insights · Understanding the Material World

High-pressure polyethylene process: Overview

What it does

The job the technology does for people, in a short paragraph

The high-pressure process turns ethylene gas into low-density polyethylene, a soft, tough and transparent plastic. ICI chemists discovered it in 1933 [1], and the first plant started in 1939 [1]. During the Second World War it insulated radar cables [1]. Today it makes film, foam and cable coatings [6].

as of 2026-11-11

How it works

The working principle in plain words, step by step

Ethylene is a small gas molecule with a double bond that can open and join to others. In the process the gas is compressed to very high pressure, up to about 350 MPa [3], and heated. A tiny amount of oxygen or another initiator creates free radicals, molecules with an unpaired electron [1][3]. Each radical opens an ethylene double bond and passes the unpaired electron on, so a chain grows thousands of units long. Because the radicals also bite into finished chains, the polymer gets many side branches [3]. The branches stop the chains packing tightly, which makes the plastic less dense, softer and clearer than linear polyethylene. Only part of the ethylene reacts on each pass; the rest is recycled [6].

as of 2026-11-11

Key figures

The handful of numbers that size it up, each with its unit, year and source

FigureValueUnitYearSource
Pressure of the discovery experiment1900atm1933[1]
Capacity of the first full-scale plant100t per year1939[1]
Share of world LDPE capacity in tubular reactors70%2025[6]
Conversion per pass, high-conversion tubular reactor, upper end36%2025[6]
World plastics production, all polymers430.9million t2024[4]

as of 2026-11-11. For the tubular-reactor rows, 2025 is the publication year of the industry review, not a data year [6].

Where it is used

The main places and products the technology is found in

  • Packaging and agricultural film [6]
  • Insulation for wires and cables, first for wartime radar [1][6]
  • Foam [6]
  • Coatings and moulded goods

as of 2026-11-11

Scale today

How much of it there is now: units in use, made each year and who uses it

Installed
Tubular reactors hold 70% of world LDPE capacity; a tubular plant typically makes 400,000 to 500,000 t a year [6]
Unit
t per year
Note
No open source opened gives total world LDPE output; all plastics together came to 430.9 million t in 2024 [4].

as of 2026-11-11

Sources

  1. Dermot Manning and colleagues at ICI - Plastic Fantastic The Chemical Engineer, IChemE (Claudia Flavell-While), 2011
  2. Low-density polyethylene Encyclopaedia Britannica
  3. Plastics the Fast Facts 2025 Plastics Europe (October 2025), 2025
  4. Overview on low-density polyethylene manufacturing technologies Hydrocarbon Processing, May 2025 (B. Mahalingam and M. Ghodasara, Saudi Aramco), 2025