Material Insights · Understanding the Material World

Kroll process (titanium): Energy footprint

Energy in use

The energy it uses or converts while it works, and how efficiently

Consumption
About 50 kWh per kg of titanium, a figure given for the whole process
Conversion
Electricity and heat are used to chlorinate the ore, hold the retort at 800 to 900 degrees Celsius and purify the sponge
Efficiency
Not given
Unit
kWh per kg of titanium
Note
The same review puts the process at more than 2 kg of carbon dioxide per kg of titanium, in a review published in 2017 [3]. The split between electricity and heat is not given.

as of 2026-11-12

Energy links

The energy sources and technologies it uses, holds, converts, loses or gets back

Consumes
  • Ht Heat The reduction retort is heated to 800 to 900 degrees Celsius [1].
  • El Electricity The process as a whole uses about 50 kWh per kg of titanium [3]; the review does not say how much of that is electricity.

as of 2026-11-12

Sources

  1. Titanium Metal: Extraction to Application U.S. Department of Energy, Albany Research Center (report DOE/ARC-1999-060; Gambogi and Gerdemann), 1999
  2. Development of the Fray-Farthing-Chen Cambridge Process: Towards the Sustainable Production of Titanium and Its Alloys JOM (The Minerals, Metals and Materials Society), vol. 70, issue 2, pp. 129 to 137; PubMed Central copy, 2017