Material Insights · Understanding the Material World

Screw micrometer

A fine screw measures lengths to a hundredth of a millimetre, the basis of precision work.

Sensing and measurement · Measurement · No. 480

  • First industrial revolution
  • Readiness 9 of 9
  • Component
Sensing and measurement · Technology

Turning a fine screw one turn moves it exactly one thread: that simple fact lets a hand tool measure a thousandth of a millimetre.

Chart: Illustration: Screw micrometer

Where it comes from

Chart: Map of where it comes from

Astronomers first used fine screws to measure small distances in the 1630s. Henry Maudslay built a bench micrometer for his London workshop about 1805, and Jean-Laurent Palmer made it hand-held in 1848.

Three things to know
  1. Maudslay's bench micrometer of about 1805 was nicknamed the Lord Chancellor because it settled every dispute over size in his workshops.
  2. Palmer patented the first hand-held screw micrometer in 1848, and the French still call the tool a palmer.
  3. An American firm saw Palmer's tool at the Paris Exposition of 1867 and began making it in large numbers.
The journey
  1. 1 ScrewA steel spindle is cut and ground with a very even thread
  2. 2 FrameA rigid C-shaped frame holds the anvil opposite the spindle
  3. 3 ClosingThe spindle is turned until the work sits between spindle and anvil
  4. 4 ReadingTurns and fractions of a turn are read on the sleeve and thimble
  5. 5 DigitalAn encoder can show the reading on a display instead
Go deeper pick a tab to open it in full