Material Insights · Understanding the Material World

Screw micrometer: Overview

What it does

The job the technology does for people, in a short paragraph

A screw micrometer measures the thickness or diameter of an object very precisely by closing a screw on it. It let workshops make parts to exact sizes, which mass production needs. Maudslay used a bench micrometer about 1805 [1], Palmer made the hand-held form in 1848 [2], and mass production of the tool followed from 1867 [2]. Digital models today read to 0.001 mm [5].

as of 2026-11-11

How it works

The working principle in plain words, step by step

The heart of a micrometer is a very accurate screw. Each full turn moves the spindle forward by exactly one thread, the pitch. The spindle is fixed to a thimble whose edge is divided into equal parts, so a small part of a turn gives a tiny, known movement. Palmer's thimble had 20 divisions and could measure to 0.05 mm [3]. The object sits between the fixed anvil and the end of the spindle. The user turns the thimble until both touch it, often through a ratchet that limits the pressure, and reads whole turns on the sleeve and the fraction on the thimble. A digital micrometer counts the rotation electronically and shows the size on a display [4, 5].

as of 2026-11-11

Key figures

The handful of numbers that size it up, each with its unit, year and source

FigureValueUnitYearSource
Graduations on Maudslay's bench micrometer0inch– [3]
Accuracy of Palmer's hand-held micrometer0.05mm1848[2]
Accuracy Palmer's design could be improved to0.01mm– [2]
Resolution of a digital outside micrometer0.001mm– [5]
Thread pitch of the digital micrometer's screw1mm– [5]

as of 2026-11-11. Maudslay's micrometer was retested in 1918 and still found accurate [3]. The digital figures are from an undated Mitutoyo catalogue extract [5], so they carry no year.

Where it is used

The main places and products the technology is found in

  • Machine shops and toolrooms checking turned and ground parts
  • Inspection in car, aircraft and engine factories
  • Sheet metal, wire and tube gauging, the job of Palmer's first tool [2]
  • Calibration and metrology laboratories
  • Engineering training

as of 2026-11-11

Scale today

How much of it there is now: units in use, made each year and who uses it

Users
No world count was found; the micrometer is a standard hand tool in machine shops and inspection rooms
Note
ISO 3611:2023 covers external micrometers with analogue and digital indication [4].

as of 2026-11-11

Sources

  1. Maudslay's Lord Chancellor bench micrometer Science Museum Group Collection
  2. Jean-Laurent Palmer Linda Hall Library, Scientist of the Day (William B. Ashworth Jr.), 2021
  3. Micrometer History Mitutoyo (Cambodia site)
  4. ISO 3611:2023 Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements Standards Council of Canada, standards database, 2023
  5. DIGIMATIC Micrometer, Series 293 (catalogue pages) Mitutoyo catalogue extract, hosted by the University of Tartu Institute of Technology