Screw micrometer: Science
Principles
The science it rests on, with why each principle matters to it
Relies on- Euclidean geometry A screw thread is a helix, so a known fraction of a turn moves the spindle a known fraction of the pitch; screw threads have been used this way to measure distances since Gascoigne [3].
as of 2026-11-11. Thermal expansion of the part and the tool and the measuring force also limit accuracy, but no opened source states them.
Discoveries
The discoveries that made it possible: when, by whom and what was found
| Year | Who | What |
|---|---|---|
| 1638 | William Gascoigne | Uses screw threads in a telescope to measure the separation of stars, the first micrometer [3] |
as of 2026-11-11. Only one discovery is listed: the micrometer rests on the screw, an old mechanical idea, and Gascoigne's 1638 use is the first dated scientific use in the sources opened.
The science explained
The science behind it explained for a curious reader
Picture a spiral staircase. Every full circle you walk lifts you exactly one storey. Walk a tenth of a circle and you rise a tenth of a storey. A screw works the same way: turn it once and it moves along by one thread. If the thread is 1 mm [5] and the knob you turn has 100 marks round its edge, each mark is a hundredth of a millimetre of travel. Palmer's thimble had 20 marks [3]. The trick of the micrometer is to read a large, easy turn and convert it into a tiny, exact movement. The real difficulty is not the idea but making a screw whose every thread is the same, which is why accurate screw-cutting lathes came first [3].
as of 2026-11-11
Sources
- Micrometer History Mitutoyo (Cambodia site)
- DIGIMATIC Micrometer, Series 293 (catalogue pages) Mitutoyo catalogue extract, hosted by the University of Tartu Institute of Technology