Material Insights · Understanding the Material World

Screw-cutting lathe: Evolution

Timeline

The milestones from first idea to today

YearMilestone
1775Ramsden completes a circular dividing engine whose screws were cut on his own lathe; it reduces errors to under half a second of arc [4, 6, 7]
1777Ramsden publishes a description of his dividing engine and receives a grant from the Board of Longitude [3, 4]
1800Henry Maudslay builds his screw-cutting lathe with a lead screw and change wheels, about this year [1]
1841Joseph Whitworth proposes a standard thread with 55 degree flanks [5]
1864William Sellers proposes a 60 degree thread standard in the United States [5]

as of 2026-11-11

Lineage

The technologies it came from and the ones that came from it

Builds on
  • Lth Lathe It adds a lead screw geared to the spindle, which moves the slide rest of an ordinary lathe [1].
  • Ger Gear train Change wheels, a set of gears, tie the lead screw to the spindle and set the pitch of the thread [1].
Enables
  • IP Interchangeable parts Repeatable threads made standard fasteners possible, and Whitworth proposed a standard thread form in 1841 [5].

as of 2026-11-11

Sources

  1. Henry Maudslay's original screw-cutting lathe, c.1800 Science Museum Group Collection
  2. Jesse Ramsden Grace's Guide to British Industrial History
  3. Ramsden, Jesse (Dictionary of Scientific Biography entry) Roderick S. Webster, Dictionary of Scientific Biography (MacTutor, University of St Andrews copy)
  4. Historical Background to Screw Threads Bolt Science
  5. Jesse Ramsden: Circular Dividing Engines Grace's Guide to British Industrial History
  6. Dividing Engine Smithsonian Institution, Time and Navigation