Material Insights · Understanding the Material World

Lathe

Work spun against a cutting tool is shaped into round, true forms.

Making things · Tools and machining · No. 320

  • Ancient
  • Readiness 9 of 9
  • System
Making things · Technology

Spin the work, hold the tool still: the oldest machine tool still makes more than a quarter of Japan's machine tool output by value.

Chart: Illustration: Lathe

Where it comes from

Chart: Map of where it comes from

Woodworkers learnt to spin a piece of wood with a cord and bow and hold a chisel against it. A Mycenaean dish may be turned work of 1400 to 1100 BC; an Etruscan bowl of about 700 BC is clearer.

Three things to know
  1. The earliest possible lathe-turned object is a wooden dish from Mycenae dated 1400 to 1100 BC, though the evidence is weak.
  2. Henry Maudslay's lathe of about 1800 used a lead screw and slide rest to cut accurate screw threads, which had been made by hand.
  3. In 2024 turning machines were 26.9% of Japan's machine tool production by value, and numerically controlled ones alone 24.9%.
The journey
  1. 1 MountThe workpiece is gripped in a chuck or held between centres
  2. 2 SpinA motor, once a bow, pole or treadle, turns the work
  3. 3 CutA hard tool is pressed against the spinning surface
  4. 4 FeedThe tool moves along and across the work to shape it
  5. 5 PartA round, true shaft, bowl, bolt or bore comes off the machine
Go deeper pick a tab to open it in full