Material Insights · Understanding the Material World

Lathe: Evolution

Timeline

The milestones from first idea to today

YearMilestone
-1300A wooden dish from a pit grave at Mycenae, dated 1400 to 1100 BC, may be the earliest turned object [1]
-700An Etruscan wooden bowl shows clear signs of turning, about 700 BC [1]
-300A relief in the tomb of Petosiris in Egypt shows a lathe at work, the earliest picture of one [1]
1283A picture of 1283 shows turning on a bow lathe, which one person could work [1]
1800Henry Maudslay builds a screw-cutting lathe in London to make accurate screw threads, about 1800 [3]
1950From the 1950s, servomechanisms and numerical control begin to steer lathes [2]
2024Turning machines make up 26.9% of Japan's machine tool production by value [4]

as of 2026-11-10. Sources differ on the early dates: the woodturning history puts the Etruscan bowl at about 700 BC and the earliest Egyptian evidence in the 3rd century BC, Wikipedia gives the 6th century BC and the 4th century BC [1, 2].

Lineage

The technologies it came from and the ones that came from it

Came before it
  • PW Potter's wheel The potter's wheel first used rotation about a fixed axis to make round shapes; the lathe turns the work against a cutting tool instead of shaping soft clay by hand.
Came after it Works with
  • Mil Milling machine The milling machine cuts flat faces and slots with a spinning tool, the shapes a lathe cannot make; machine shops use both.
Enables
  • IP Interchangeable parts Accurate, repeatable turning of shafts and screws made it possible to make parts that fit any copy of a machine.

as of 2026-11-10

Sources

  1. A brief history of woodturning The Woodturner's Workshop (Brian Clifford), hosted by the Woodturners' Guild of Ontario
  2. Wikipedia: Lathe
  3. Henry Maudslay's original screw-cutting lathe, c.1800 Science Museum Group Collection
  4. Machine Tool Industry Japan 2025 Japan Machine Tool Builders' Association, 2025