Material Insights · Understanding the Material World

Lathe: Materials

Materials it needs

The commodities and chemicals it needs per unit, its share of each one's demand and how critical each is

Needs
  • St Steel criticality low Lathe beds, spindles and slides are made of cast iron and steel, and steel is also the most common metal turned.
  • W Tungsten criticality high Most metal-cutting tool tips are tungsten carbide cemented with cobalt; about 60% of the tungsten used in the United States goes into cemented carbide parts [6].
  • Co Cobalt criticality high Cobalt binds the carbide grains in cutting tool inserts; 9% of the cobalt used in the United States goes into cemented carbides [7].
Processes
  • Al Aluminium criticality low Aluminium parts are turned in large numbers for cars and machines.
  • Tm Timber criticality low Wood was the first material turned and is still turned for furniture and bowls.

as of 2026-11-10. No source gives material amounts per lathe; criticality is a judgement: tungsten and cobalt are critical and strategic raw materials in the EU [8], and their mining is concentrated in China and the Democratic Republic of the Congo [6, 7].

Critical materials

The materials whose supply could hold it back

  • Tungsten: cutting tool inserts depend on it; China mined about 79% of the world's tungsten in 2025 (calculated), and the EU lists it as a critical and strategic raw material [6, 8].
  • Cobalt: the binder of carbide tools; the Democratic Republic of the Congo mined about 74% of the world's cobalt in 2025 (calculated), and the EU lists it as critical and strategic [7, 8].
  • Lathe frames and spindles need only common cast iron and steel.

as of 2026-11-10

Sources

  1. Tungsten, Mineral Commodity Summaries 2026 U.S. Geological Survey, 2026
  2. Mineral Commodity Summaries 2026: Cobalt US Geological Survey, 2026
  3. RMIS - Critical and Strategic Materials European Commission, Joint Research Centre, Raw Materials Information System