Material Insights · Understanding the Material World

Lathe: Overview

What it does

The job the technology does for people, in a short paragraph

A lathe makes round things. It spins the workpiece while a cutting tool shaves it into a cylinder, cone, thread or bowl that is true to its axis. Turned wood may date back to 1400 to 1100 BC [1]. Metal lathes became the basic machine tool of industry after about 1800 [3], and turning machines were 26.9% of Japan's machine tool output by value in 2024 [4].

as of 2026-11-10

How it works

The working principle in plain words, step by step

The workpiece is held at one end in a chuck, or between two pointed centres, and spun about a fixed axis. A cutting tool harder than the work is clamped in a holder and pressed against the turning surface. Because every point on the surface passes the tool edge, the cut leaves a shape that is perfectly round about the axis. The tool is moved along the work to make a cylinder and across it to face an end or cut a shoulder. On a screw-cutting lathe a lead screw, geared to the spindle, moves the tool a fixed distance for each turn, so it cuts an even thread [3]. Early lathes were turned by a bow, a springy pole or a treadle; today an electric motor turns the spindle and a computer moves the tool [2].

as of 2026-11-10

Key figures

The handful of numbers that size it up, each with its unit, year and source

FigureValueUnitYearSource
Japan's machine tool production value901.3billion JPY2024[4]
Turning machines' share of Japan's machine tool production value26.9%2024[4]
Numerically controlled turning machines' share of Japan's production value24.9%2024[4]
China's share of world machine tool production (all types)37%2025[5]

as of 2026-11-10. No source opened gives world lathe output. World shares are for all machine tools [5]; the turning shares are for Japan only, from its machine tool builders' association [4].

Where it is used

The main places and products the technology is found in

  • Shafts, axles, bolts and other round parts for cars, aircraft and machines
  • Machine shops and toolrooms making one-off and spare parts
  • Woodturning of bowls, spindles, table legs and chair parts
  • Watch, instrument and medical parts on small precision lathes

as of 2026-11-10

Scale today

How much of it there is now: units in use, made each year and who uses it

Made per year
Turning machines worth about 242 billion yen were made in Japan alone [4]
Unit
JPY of production value
Year
2024
Note
Counts Japan's output only (11,376 turning machines in 2024); no world count of lathes made or in use was found.

as of 2026-11-10

Sources

  1. A brief history of woodturning The Woodturner's Workshop (Brian Clifford), hosted by the Woodturners' Guild of Ontario
  2. Wikipedia: Lathe
  3. Henry Maudslay's original screw-cutting lathe, c.1800 Science Museum Group Collection
  4. Machine Tool Industry Japan 2025 Japan Machine Tool Builders' Association, 2025
  5. German machine tool industry leveling off: China further dominating production VDW (German Machine Tool Builders' Association), press release, 2026