Prestressed concrete
Tendons tensioned before load squeeze concrete so it stays in compression, allowing long thin spans.
Building and shelter · Structures · No. 217
- Electrical and chemical age
- Readiness 9 of 9
- Process
Concrete cracks when stretched, so engineers squeeze it first with steel pulled tight, letting thin beams leap long gaps.
Chart: Illustration: Prestressed concrete
Where it comes from
Chart: Map of where it comes from
French engineer Eugène Freyssinet saw his concrete arches keep deforming for years. By 1927 he concluded that steel stretched hard against strong concrete could keep it squeezed, and he patented the idea in 1928.
Three things to know
- Concrete slowly shrinks and creeps for years, so Freyssinet paired high-quality concrete with high-strength steel stretched hard enough to keep its squeeze.
- Its first real use, in 1934, was to rescue the Le Havre Maritime Station, which was sinking about 25 mm a month into clay.
- Philadelphia's Walnut Lane Memorial Bridge, opened in late 1950, was the first major prestressed concrete structure in North America.
The journey
- 1 SteelHigh-strength steel is drawn into wire and wound into strand
- 2 ConcreteA strong, carefully cured concrete is cast around ducts or stretched strands
- 3 TensioningJacks pull the steel tight, before casting or once the concrete has hardened
- 4 AnchoringWedges and anchor plates lock the steel so it keeps squeezing the concrete
- 5 ServiceBeams, slabs, bridge decks and tanks carry loads without opening cracks