Prestressed concrete: Materials
Materials it needs
The commodities and chemicals it needs per unit, its share of each one's demand and how critical each is
Needs 4- St Steel criticality low High-strength steel wire, strand or bar forms the tendons; Freyssinet's methods used steel of about 1310 to 1380 MPa [1].
- Cem Cement criticality low The binder of the high-strength concrete and of the grout that fills tendon ducts.
- Agg Sand & gravel criticality low Sand and gravel make up most of the concrete.
- Stn Crushed stone criticality low Crushed rock is the coarse aggregate where gravel is lacking.
- Con Construction chemicals criticality low Admixtures give the concrete early strength so tendons can be stressed sooner, and keep grout fluid.
as of 2026-11-11. No opened source gives amounts per cubic metre or per metre of span; criticality is the writer's judgement: all inputs are bulk materials made in many countries.
Critical materials
The materials whose supply could hold it back
- No input is scarce: steel and cement are made in very large amounts in many countries.
- The tendons need much stronger steel than ordinary reinforcing bar, about 1310 to 1380 MPa in Freyssinet's early work [1], so fewer mills can supply them.
as of 2026-11-11
Sources
- Eugène Freyssinet - The Origins of Prestressed Concrete (P. Xercavins, D. Demarthe and K. Shushkewich) Precast/Prestressed Concrete Institute (PCI), 2008