Programmable logic controller: Overview
What it does
The job the technology does for people, in a short paragraph
A programmable logic controller is a hardened computer that runs a machine or a production line. It reads switches and sensors, decides what should happen and turns motors, valves and lamps on and off. It was devised in 1968 for General Motors to replace electromechanical relays [1, 2, 3], and it is still widely used for its reliability and familiarity [3].
as of 2026-11-11
How it works
The working principle in plain words, step by step
A PLC works in a fixed loop called a scan [4]. First it records the state of every input, digital and analogue, such as a limit switch or a temperature sensor. Then it executes its program logic. Last it writes the results to its outputs, and the loop starts again until the power goes off [4]. Programs are often drawn as ladder logic, a form taken from relay wiring diagrams [4]: contacts in series act as AND, contacts in parallel as OR [4]. The IEC 61131-3 standard also defines text and function block languages [5]. Modern PLCs run closed-loop control such as PID, which holds a speed or temperature steady, as well as logic [3].
as of 2026-11-11
Key figures
The handful of numbers that size it up, each with its unit, year and source
| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Length of General Motors' design specification for the first controllers | 4 | pages | 1968 | [2] |
| Rival controllers evaluated by GM Hydra-Matic | 3 | systems | 1969 | [2] |
| Elements in Modicon's relay-like programming language | 4 | elements | 1969 | [2] |
| Edition of IEC 61131-3, the PLC programming language standard | 4 | edition number | 2025 | [5] |
as of 2026-11-11. No source opened gives a count of PLCs installed or a market size.
Where it is used
The main places and products the technology is found in
- Car and component plants, where it began
- Sequencing robots in automated work cells
- Packaging, bottling and food processing lines
- Pumps, water treatment and building services
- Process plants alongside distributed control systems
as of 2026-11-11
Sources
- Top tech: 75 years of automation milestones Bill Lydon, InTech, International Society of Automation (ISA), September-October 2020, 2020
- Inside the competition for the first PLC Randy Brodzik (RedViking, who worked for Dave Emmett for 29 years), Control Engineering, 2014
- A History of Automatic Control C. C. Bissell (chapter in a Springer handbook, ISBN 978-3-540-78830-0; Lund University course copy)
- Introduction to Programmable Logic Controllers (PLC) ECEN 4856 Lecture 7 slides, Youngstown State University (course pages of J. Zapka), dated 10/12/2014, 2014
- IEC 61131-3:2025 Programmable controllers - Part 3: Programming languages International Electrotechnical Commission (IEC) webstore, 2025