Programmable logic controller: Evolution
Timeline
The milestones from first idea to today
| Year | Milestone |
|---|---|
| 1968 | Dave Emmett of GM Hydra-Matic proposes a standard machine controller in April; a request for proposals with four pages of specifications follows in June [2] |
| 1969 | A DEC PDP-14 is installed in June to control a gear grinder [2]; the Modicon 084 is demonstrated to Hydra-Matic in November [1] |
| 1970 | The first PLC is delivered to General Motors [1] |
| 1971 | Allen-Bradley buys 3-I, maker of the rival PDQ-II controller [2] |
| 1975 | Honeywell's TDC 2000 begins commercial distributed control systems, the process-plant counterpart of the PLC [1] |
| 2025 | The fourth edition of IEC 61131-3, the standard for PLC programming languages, is published [5] |
as of 2026-11-11
Lineage
The technologies it came from and the ones that came from it
Builds on- ENI Electronic digital computer A PLC is an industrial computer with a built-in operating system [4]; one of the first, the DEC PDP-14, came from a computer maker [2].
- Rbt Industrial robot In automated cells the PLC is the master controller that sequences the logic, and it can move a robot through its ladder program [6].
as of 2026-11-11
Sources
- Top tech: 75 years of automation milestones Bill Lydon, InTech, International Society of Automation (ISA), September-October 2020, 2020
- Inside the competition for the first PLC Randy Brodzik (RedViking, who worked for Dave Emmett for 29 years), Control Engineering, 2014
- Introduction to Programmable Logic Controllers (PLC) ECEN 4856 Lecture 7 slides, Youngstown State University (course pages of J. Zapka), dated 10/12/2014, 2014
- IEC 61131-3:2025 Programmable controllers - Part 3: Programming languages International Electrotechnical Commission (IEC) webstore, 2025
- Small-Assembly-Robot Integration Concepts Within the PLC Control Design (Chris Elston), 2015