Material Insights · Understanding the Material World

Industrial robot

A programmable arm repeats tasks such as welding, painting and handling.

Making things · Automation and control · No. 337

  • Electronic age
  • Readiness 9 of 9
  • System
Making things · Technology

The first robot arm took a hazardous job, lifting red-hot castings at General Motors in 1961; 4.66 million now work in factories.

Chart: Illustration: Industrial robot

Where it comes from

Chart: Map of where it comes from

Inventor George Devol applied for a patent on a programmable arm in 1954, and his business partner Joseph Engelberger took it to market. Their first Unimate unloaded a die-casting press at a General Motors plant in New Jersey in 1961.

Three things to know
  1. George Devol applied for a patent on a programmed arm in 1954, and the patent was issued in 1961.
  2. Japan's Kawasaki built its first Unimate under licence in 1969, and by the mid-1980s Japan had nearly 70% of the world's robots.
  3. In 2024 factories had on average 177 robots for every 10,000 manufacturing workers.
The journey
  1. 1 ArmRigid metal links joined by several rotating joints
  2. 2 DrivesAn electric servo motor and gearbox turn each joint
  3. 3 ProgramA sequence of positions is taught or written in software
  4. 4 ControlThe controller drives every joint to each position in turn
  5. 5 ToolA gripper, welding torch or spray gun does the work
  6. 6 TaskThe arm repeats the cycle all day without tiring
Covered in What engineers do: rules of thumb, the method and the kinds of engineering knowledgeEngineeringControl and systems: feedback, stability and how machines are made to behaveEngineering
Go deeper pick a tab to open it in full