Industrial robot: Evolution
Timeline
The milestones from first idea to today
| Year | Milestone |
|---|---|
| 1954 | George Devol applies for a patent on a 'Programmed Article Transfer' [3] |
| 1961 | The first Unimate unloads a die-casting press at General Motors in Trenton, New Jersey; Devol's patent is issued [1, 2] |
| 1969 | Kawasaki completes its first Kawasaki-Unimate 2000 in Japan [4] |
| 2024 | 542,000 robots are installed in a year, more than double the number ten years earlier [5] |
| 2028 | The IFR expects annual installations to pass 700,000 [5] |
as of 2026-11-11
Lineage
The technologies it came from and the ones that came from it
Came before it- CNC Numerical control machining Britannica describes industrial robotics as a combination of numerical control, which gave the idea of a programmable machine, and teleoperators [1].
- Cob Collaborative robots Collaborative robots are lighter arms built to work beside people without safety fences.
- AL Moving assembly line The first Unimate took its place on a General Motors assembly line [4], and robots now do welding and painting along car lines.
- PLC Programmable logic controller In a robot cell the PLC is often the master controller that sequences the work and exchanges signals with the robot controller over a fieldbus [11].
- Hmn General-purpose humanoid robots The IFR expects humanoid robots not to replace today's industrial robots but to complement and expand on them [10].
as of 2026-11-11
Sources
- Automation: Development of robotics Encyclopaedia Britannica
- Robot, First Unimate Robot Ever Installed on an Assembly Line, 1961 The Henry Ford (museum collections)
- How Robots Left the Lab and Started Helping Humans Smithsonian Magazine
- In 1961, the First Robot Arm Punched In IEEE Spectrum, 2022
- World Robotics 2025 report - Industrial robots - released by IFR (Global robot demand in factories doubles over 10 years) International Federation of Robotics, press release, 2025
- Humanoid Robots: 'Vision and Reality' Position Paper Released by IFR Automation.com (ISA), 2025
- Small-Assembly-Robot Integration Concepts Within the PLC Control Design (Chris Elston), 2015