Puddling (wrought iron)
Stirring molten pig iron in a reverberatory furnace burns out carbon to make wrought iron in bulk.
Making materials · Metals · No. 393
- First industrial revolution
- Readiness 9 of 9
- Process
Puddlers stirring a boiling mass of iron by hand made Britain's wrought iron, and output rose almost five-fold between 1788 and 1815.
Chart: Illustration: Puddling (wrought iron)
Where it comes from
Chart: Map of where it comes from
Henry Cort took out patents in 1783 and 1784 for rolling iron and for refining it in a reverberatory furnace. From 1811 Joseph Hall improved the furnace bottom with iron oxide, and his wet puddling was in commercial use by 1830.
Three things to know
- Keeping the fuel apart from the iron let ironworks use mineral coal without adding too much sulphur.
- In dry puddling as much as half the iron could be lost in the slag; wet puddling cut that to between an eighth and a quarter.
- Steel output first passed wrought iron output in Britain only in 1885.
The journey
- 1 Pig ironBrittle, high-carbon iron from the blast furnace
- 2 MeltingThe furnace flame melts the charge on a separate hearth
- 3 BoilStirred against iron oxide slag, the carbon burns out as gas
- 4 BallingPasty iron is gathered into balls wrapped in slag
- 5 Squeezing and rollingSlag is pressed out and the bloom is rolled into bars