Material Insights · Understanding the Material World

Puddling (wrought iron): Science

Principles

The science it rests on, with why each principle matters to it

Relies on

as of 2026-11-11

The science explained

The science behind it explained for a curious reader

Pig iron from a blast furnace carries a lot of carbon, which makes it hard but brittle. Wrought iron has less than 0.5% [5], so it bends instead of snapping. Puddling takes the carbon out by giving it something to react with. Iron oxide in the slag gives up its oxygen to the carbon, and the two leave as carbon monoxide gas [1]. That gas is what makes the melt bubble, the boil. As carbon leaves, the iron needs a higher temperature to stay liquid, so in a furnace held at the same heat it begins to freeze into pasty grains [1]. The art was to stop at the right moment: a good puddler burned out the carbon without burning away too much of the iron [2].

as of 2026-11-11

Sources

  1. Puddling: a metallurgical perspective (Merton C. Flemings and David V. Ragone), Historical Metallurgy 43(2), pp. 103 to 108 Historical Metallurgy Society, 2009
  2. Introduction to the archaeometallurgy of iron (Donald B. Wagner) donwagner.dk, 2024
  3. Archaeology Datasheet 302: Steelmaking Historical Metallurgy Society, 2010