Railway air brake
Compressed air applies brakes on every wagon of a train at once, and fails safe.
Moving people and goods · Rail · No. 448
- Steam and steel
- Readiness 9 of 9
- Component
On a long train, letting air out of a pipe is what stops it: the brakes come on when pressure falls.
Chart: Illustration: Railway air brake
Where it comes from
Chart: Map of where it comes from
In the 1860s brakemen walked the roofs of moving trains turning hand wheels. George Westinghouse patented a brake worked by compressed air in 1869 and made it fail safe in 1872.
Three things to know
- Westinghouse's first air brake of 1869 failed if the pipe broke; his automatic brake of 1872 put a reservoir on every car so that a break applied the brakes.
- By 1877 most US railways had air brakes on passenger trains, but in 1893 almost 90% of freight cars were still braked by hand.
- The US Safety Appliance Act of 1893 required air brakes and gave the railways seven years to comply.
The journey
- 1 CompressorThe locomotive pumps air into a main reservoir
- 2 Brake pipeA pipe along the whole train is kept full of air
- 3 Reservoir on each carEvery vehicle stores its own supply of air
- 4 Driver's valveThe driver lets air out of the brake pipe to brake
- 5 Valve and cylinderEach car's valve senses the drop and sends stored air to its brake cylinder
- 6 Brake blocksBlocks or pads press on wheels or discs and turn motion into heat