Statistical quality control: Science
Principles
The science it rests on, with why each principle matters to it
Relies on- Probability and statistics Control limits come from the normal distribution: tables of it give the 0.0027 chance that a stable process falls outside 3-sigma limits [3].
as of 2026-11-11
Discoveries
The discoveries that made it possible: when, by whom and what was found
| Year | Who | What |
|---|---|---|
| 1778 | Pierre-Simon Laplace | Found the distribution later called normal, the bell curve of errors [4] |
| 1809 | Carl Friedrich Gauss (and Robert Adrain, 1808) | Developed the formula for the normal distribution [4] |
| 1924 | Walter Shewhart | Proposed judging a process by samples taken during production, against limits set by its normal scatter [1, 2] |
as of 2026-11-11
The science explained
The science behind it explained for a curious reader
Think of throwing darts at a board while trying to hit the same spot. Even a steady hand scatters the darts a little, and most land near the middle. That scatter follows the bell-shaped normal curve worked out by Laplace and Gauss [4]. A control chart draws a ring around the middle wide enough to hold nearly all darts from a steady hand: three standard deviations each way [3]. A dart outside the ring is so unlikely by chance, about 3 in 1,000 [3], that something has probably changed, such as a draught or a bent flight. Shewhart's insight was to apply this to machines: leave the normal scatter alone, and hunt only for the causes behind the rare darts outside the ring.
as of 2026-11-11
Sources
- Walter A. Shewhart: Father of statistical quality control American Society for Quality (ASQ), honorary members pages
- Chapter 1 Introduction Historical Background | An Introduction to Acceptance Sampling and SPC with R John Lawson, bookdown.org
- 6.3.1. What are Control Charts? NIST/SEMATECH e-Handbook of Statistical Methods, US National Institute of Standards and Technology
- History of the Normal Distribution David M. Lane, Online Statistics Education