Tower crane: Overview
What it does
The job the technology does for people, in a short paragraph
A tower crane lifts steel, concrete, formwork and other heavy loads to any point of a building site, and keeps doing so as the building rises. Wolff built the first in 1910 [1]. Liebherr's low-priced, quick-erecting crane followed in 1949 [1], and climbing cranes from 1956 [1] made modern high-rise building possible.
as of 2026-11-11
How it works
The working principle in plain words, step by step
A steel lattice mast stands on a heavy concrete base or on rails. At its top a slewing ring, a large turning bearing, carries a horizontal arm called the jib. On a hammerhead or flat-top crane, a trolley runs along the jib with the hook hanging below it, so the load can move in and out as well as round [2]. A shorter counter-jib behind the mast carries concrete counterweights. They balance the turning effect of the load, its weight times its distance from the mast, so the crane does not tip. A luffing crane instead raises and lowers its jib to change reach, useful on cramped sites. Climbing cranes add mast sections or jack themselves up inside the building as it grows [1].
as of 2026-11-11
Key figures
The handful of numbers that size it up, each with its unit, year and source
| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Capacity of early tower cranes | 1 | tonne or less | – | [2] |
| Capacity of Liebherr's first mobile tower crane | 1000 | kg | 1949 | [1] |
| Jib length of that crane | 16 | m | 1949 | [1] |
| Capacity of Zoomlion's largest flat-top crane | 450 | t | 2021 | [2] |
| Maximum hook height of that crane | 400 | m | 2021 | [2] |
as of 2026-11-11. Cranes Today gives the early capacity for small tower cranes of the late 19th and early 20th centuries, with reaches of 5 to 16 m [2].
Where it is used
The main places and products the technology is found in
- High-rise office and residential towers
- Housing and commercial building sites
- Bridges, dams and power stations
- Shipyards and precast concrete yards
as of 2026-11-11
Scale today
How much of it there is now: units in use, made each year and who uses it
- Note
- No opened source counts tower cranes in use or made each year. Most makers offer climbing cranes [1], and the largest models of 2021 and after are rated at 12,000 to 15,000 tonne-metres [2].
as of 2026-11-11
Sources
- Cranes Enabled Faster, Safer Construction of Tall Buildings (20 August 2008) ENR (Engineering News-Record), 2008
- Origin of the species (Amit Thadani) Cranes Today, 2022