Material Insights · Understanding the Material World

Tower crane

A tall mast with a rotating jib lifts materials to any point of a high-rise site.

Building and shelter · Construction methods · No. 439

  • Second industrial revolution
  • Readiness 9 of 9
  • System
Building and shelter · Technology

Early tower cranes lifted a tonne or less; the biggest of 2021 can lift 450 tonnes and reach a hook height of 400 metres.

Chart: Illustration: Tower crane

Where it comes from

Chart: Map of where it comes from

Small tower cranes worked in some European cities by the late 19th century. Wolff of Germany built a rail-mounted one in 1910, and Liebherr built a low-priced, quick-erecting one in 1949.

Three things to know
  1. Wolff built the first tower crane in 1910 and showed a top-slewing model with a luffing jib at the Leipzig fair in 1913.
  2. Liebherr's crane of 1949 was cheap and quick to set up, with a 16 m jib and a capacity of 1,000 kg.
  3. Liebherr designed the first crane that could climb as the building rose, the 25H, in 1956.
The journey
  1. 1 FoundationA concrete base or rail track holds the crane down
  2. 2 MastSteel lattice sections are stacked into a tall tower
  3. 3 Slewing unitA turntable at the top lets the jib swing round
  4. 4 Jib and counterweightA long arm carries the load and a short one carries the counterweight
  5. 5 LiftThe operator hoists loads and moves them along the jib to any point on site
Covered in Force, motion and energy: the laws every machine obeysEngineeringStructures and materials: stress, stiffness, strength and why things breakEngineeringVibration, waves and resonance in machines and structuresEngineering
Go deeper pick a tab to open it in full