Tunnelling shield
A moving iron frame holds up soft ground while miners dig and line a tunnel behind it.
Building and shelter · Construction methods · No. 437
- First industrial revolution
- Readiness 9 of 9
- Component
An iron frame of 12 cells, each holding three diggers, dug the Thames Tunnel, the first ever driven with a shield.
Chart: Illustration: Tunnelling shield
Where it comes from
Chart: Map of where it comes from
An earlier attempt to tunnel under the Thames from 1807 was stopped by quicksand. Marc Brunel patented an iron shield in 1818, and the Thames Tunnelling Company, with him as chief engineer, began digging in 1825.
Three things to know
- The Thames Tunnel, dug from 1825 to 1843, was the first tunnel driven with a shield.
- Greathead's round shield cut the Tower Subway under the Thames by 1870 and the City and South London Railway from 1886.
- Crossrail's eight boring machines, each about 1,000 tonnes, dug 42 km of tunnel under London, lined with over 200,000 concrete segments.
The journey
- 1 ShaftA deep shaft is sunk on the bank to reach tunnel level
- 2 ShieldA strong frame is set against the face of soft ground
- 3 DigWorkers inside the frame remove a little ground at a time
- 4 PushScrews or jacks move the frame forward into the space dug
- 5 LineBrick, iron or concrete lining is built behind the frame