Heat, temperature and the laws of thermodynamics: Specific heat: why water, sand and steel warm at different rates
All courses / Understanding Science / Module 5: Heat, temperature and the laws of thermodynamics Part 3 of 6Specific heat: why water, sand and steel warm at different rates
On a sunny afternoon the sand at a beach is too hot to stand on while the sea beside it is cool. The same sunlight fell on both. This part explains why materials need different amounts of heat for the same rise in temperature, why water needs so much, and how that single fact shapes coastal climate, sea breezes and the Indian monsoon.
3.1 Specific heat is the energy needed to warm one kilogram by one kelvin, and it is set by how many ways the particles can store energy
Hold a steel spoon and a cup of water over one flame for a minute. The spoon becomes too hot to touch long before the water is warm. Joseph Black, a Scottish chemist, studied this around 1760. Equal masses of hot and cold water settle at the midpoint, but a hot metal mixed with cold water does not. So 'amount of heat' and 'temperature' had to be separate ideas, and each material had its own appetite for heat.
That appetite is the specific heat capacity, c: the heat needed to raise 1 kg of the material by 1 K. The rule for any heating or cooling is heat = mass x specific heat x temperature change. For water c is about 4,186 J per kg per K (USGS gives 4,184). For copper it is 385.
Why these numbers? Start with a solid, where atoms are like balls on springs. An atom can move in three directions, and in each it stores energy both as movement and as stretch of its springs. Counting that up gives about 3 x 8.3 = 25 joules per mole per kelvin, and the 1819 law of Dulong and Petit found this to hold for nearly every solid element. A kilogram of a heavy element has fewer atoms than a kilogram of a light one, so heavy elements have low specific heat. The table checks this. Applied to water, three atoms per molecule give about 75 J per mole per kelvin, and an 18 gram mole is a light load, so about 4,170. The match is partly luck: ice, with the same atoms, needs only about 2,100. The liquid's extra goes into stretching and breaking hydrogen bonds between molecules. Light, plentiful atoms are only the start of why water is so high.
| Material | Molar mass (g per mole) | Count: 25 / molar mass (J per kg per K) | Measured (J per kg per K) |
|---|---|---|---|
| Aluminium | 27 | about 930 | about 900 |
| Iron | 55.8 | about 450 | about 450 |
| Copper | 63.5 | about 390 | 385 |
| Lead | 207 | about 120 | about 130 |
| Water (3 atoms x 25 / 18 g) | 18 | about 4,170 | 4,186 |
Counts calculated here from the Dulong and Petit rule. The measured copper and water figures are from USGS; others are standard rounded values.
Source: USGS Water Science School, Specific heat capacity and water, https://www.usgs.gov/water-science-school/science/specific-heat-capacity-and-water (4,184 J per kg per degree C for water; 385 J for copper; coasts have milder temperature ranges than inland cities)| Item | Working | Result |
|---|---|---|
| Heat to warm 1.5 kg of water from 25 °C to 100 °C | 1.5 kg x 4,186 J/kg K x 75 K | about 470 kJ (calculated) |
| Time on a 2 kW element, no losses | 470,000 J / 2,000 W | about 235 s, nearly 4 minutes (calculated) |
| Heat to warm a 0.8 kg copper pan from 20 °C to 120 °C | 0.8 kg x 385 J/kg K x 100 K | about 31 kJ (calculated) |
| Time for the pan | 31,000 J / 2,000 W | about 15 s (calculated) |
A real kettle takes about 4 minutes for this job, so the estimate is close. The pan heats about 15 times faster than the water because it needs far less energy per degree.
Source: USGS Water Science School, Specific heat capacity and water, https://www.usgs.gov/water-science-school/science/specific-heat-capacity-and-water (4,184 J per kg per degree C for water; 385 J for copper; coasts have milder temperature ranges than inland cities)- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 6, 'Heat'
- USGS Water Science School, Specific heat capacity and water · web
3.2 Land warms and cools quickly while the sea changes slowly, so coasts have mild climates and interiors have extremes
Three reasons stack up. First, water's specific heat is roughly five times that of dry sand or soil, so a kilogram of sea warms much less for the same energy. Second, sunlight passes into clear water and is spread through many metres. Waves and currents then stir that heat further down, so a large mass shares it. Sand absorbs sunlight in the top few millimetres and conducts heat downward poorly, so a thin layer takes the whole load. Third, the sea loses part of what it receives by evaporation.
The sums are worth doing. Suppose a square metre of surface takes in 10 MJ in a sunny day. If that heat is shared through the top 10 m of sea, the sea warms by about a quarter of a degree. If it stays in the top half metre of soil, the soil warms by about 16 K. That difference of around 65 times is the engine of coastal climate.
So coastal places have small annual swings and inland places large ones. Compare Mumbai and Nagpur, which lie at similar latitudes. Mumbai's monthly means run from 24.6 °C in January to 30.2 °C in May, a swing of 5.6 K. Nagpur's mean day temperature runs from about 20.7 °C in December to 35.3 °C in May, a swing of about 14.6 K, and its record high is 47.9 °C.
| Item | Working | Result |
|---|---|---|
| Sunlight absorbed by 1 m² in a day (assumed) | 10 MJ | |
| Sea: top 10 m, c about 3,990 J/kg K | 10 m x 1,025 kg/m³ = 10,250 kg; 10,250 kg x 3,990 J/kg K = 41 MJ per K; 10 MJ / 41 MJ per K | rise of about 0.24 K (calculated) |
| Dry soil: top 0.5 m, c about 800 J/kg K | 0.5 m x 1,600 kg/m³ = 800 kg; 800 kg x 800 J/kg K = 0.64 MJ per K; 10 MJ / 0.64 MJ per K | rise of about 16 K (calculated) |
| Mumbai: warmest month (May) minus coolest (Jan) | 30.2 - 24.6 | 5.6 K (calculated) |
| Nagpur: warmest month (May) minus coolest (Dec) | 35.3 - 20.7 | 14.6 K (calculated) |
The sea and soil lines are an idealised calculation: real soil also loses heat to evaporation and conduction. Mumbai's monthly means come from WMO normals compiled by the Japan Meteorological Agency; Nagpur's are the midpoints of IMD mean maximum and minimum for 1969 to 2010, so the two columns are not exactly the same measure.
Source: Japan Meteorological Agency, Tokyo Climate Center, climate normals for Bombay/Santacruz (WMO 43003), https://ds.data.jma.go.jp/gmd/tcc/tcc/products/climate/normal/parts/NrmMonth_e.php?stn=43003 (monthly mean temperature 24.6 C in January to 30.2 C in May); India Meteorological Department, Regional Meteorological Centre Nagpur, Climate of Nagpur, https://imdnagpur.gov.in/docs_general/Climate_NGP_English.pdf (Table 1(A), 1969 to 2010: mean maximum and minimum by month; its record of 47.7 C on 26 May 1954 was passed by 47.9 C on 23 May 2013)- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 6, 'Heat'
- USGS Water Science School, Specific heat capacity and water · web
- Japan Meteorological Agency, Tokyo Climate Center, climate normals for Bombay/Santacruz (WMO 43003) · web
- India Meteorological Department, Regional Meteorological Centre Nagpur, Climate of Nagpur · web
3.3 The monsoon is a continent-sized sea breeze, driven by the unequal heating of land and ocean
By early afternoon on a sunny coast the ground can be several degrees warmer than the water. Air over the hot ground expands, so a column of it weighs less, and the pressure at its foot dips a little below the pressure over the sea. Air moves from high pressure to low, so a breeze sets in off the water while the light air over land rises and drifts seaward aloft. After sunset the ground cools faster, the pressure difference flips, and so does the wind. A sea breeze is a small heat engine fed by the difference in specific heat.
Now enlarge the scene to the size of a subcontinent and a season. In April and May the noon Sun is nearly overhead across central and northern India, and the plains of the north-west bake. The land heats far faster than the Indian Ocean to the south, and an intense low-pressure region forms over the north-west. The cooler, higher-pressure air over the ocean is drawn towards it. NCERT describes how the south-east trade winds are pulled across the equator and, deflected by the Earth's spin, become the south-west monsoon. In this classic picture the monsoon is a seasonal sea breeze. Meteorologists now treat it as only part of the story: the northward march of the tropical rain belt and the heating of the high Tibetan Plateau matter too.
It feeds itself, too. Moist air rising over land condenses into rain, and condensation gives out latent heat (see the Latent heat node), which warms the air above and sustains the lift. In 2025, the India Meteorological Department declared the onset over Kerala on 24 May, eight days ahead of the normal date of 1 June and the earliest since 2009. IMD judges onset from widespread rain, deep westerly winds and thick cloud, not from the calendar.
- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 6, 'Heat'
- NCERT, Class XI Geography, Climate and Vegetation (India: Physical Environment) · web
- India Meteorological Department, press release 'Southwest Monsoon has set in' (24 May 2025) · web
- USGS Water Science School, Specific heat capacity and water · web
- India Meteorological Department, press release on the updated long range forecast (27 May 2025) · web
- Energy Institute, Statistical Review of World Energy 2026 (75th edition), as reported by Rice University News · web
See it in the table
H₂O WaterCu CopperSt SteelH2 HydrogenH2O Water cycleCheck your understanding
A 1 kg block of copper (c = 385 J per kg per K) and 1 kg of water each absorb 4,000 J. Roughly what happens?
Temperature rise = heat / (mass x c). Copper: 4,000 / 385 is about 10 K. Water: 4,000 / 4,186 is about 1 K.Which pair of reasons best explains why the sea warms less than land in sunshine?
Water needs about five times as much energy per kilogram as soil for one degree, and sunlight and mixing share the energy through many metres, while soil takes it in a thin layer.Why does the south-west monsoon blow from sea to land in summer?
Unequal heating creates a pressure difference. Cooler, higher-pressure air over the sea flows towards the low over the land.