Material Insights · Understanding the Material World

Heat, temperature and the laws of thermodynamics: Key terms, quiz and sources

All courses / Understanding Science / Module 5: Heat, temperature and the laws of thermodynamics Wrap-up

Heat, temperature and the laws of thermodynamics: review

Key terms

Kinetic theory of matter
The idea that all matter is made of particles in constant motion, which explains temperature, pressure and heat.
Internal energy
The total of all the motion and bonding energy of the particles in a body; often called thermal energy.
Temperature
A measure of the average translational kinetic energy per particle, not of the total energy.
Thermal equilibrium
The state in which two bodies in contact stop exchanging heat because their temperatures are equal.
Zeroth law of thermodynamics
If two bodies are each in thermal equilibrium with a third, they are in equilibrium with each other; this is why thermometers work.
Kelvin
The SI unit of temperature, counted from absolute zero; 0 degrees C is 273.15 K, and a step of 1 K equals a step of 1 degree C.
Absolute zero
The lowest possible temperature, 0 K or -273.15 degrees C, where almost no energy of motion remains to be taken.
Boltzmann constant
The number 1.380649 x 10^-23 J/K that links temperature to molecular energy; the kelvin is now defined by fixing it.
Heat
Energy that passes from one body to another because of a temperature difference, always from hotter to colder.
Calorie
The old unit of heat, 4.184 J, the heat that warms 1 g of water by 1 K; the food Calorie is 1,000 of these.
First law of thermodynamics
The change in a system's internal energy equals the heat added to it plus the work done on it.
Adiabatic change
A change in which no heat enters or leaves, so that compression warms a gas and expansion cools it.
Specific heat capacity
The heat needed to raise 1 kg of a material by 1 K; about 4,186 J per kg per K for water.
Coefficient of linear expansion
The fractional growth in length per kelvin of warming, about 12 millionths for steel.
Conduction
Heat passing through matter from particle to particle without the matter moving.
Thermal conductivity
A number, in W per metre per kelvin, for how easily a material conducts heat; low for still air, high for copper.
Convection
Heat carried by the bulk flow of a fluid, driven by warm fluid being less dense and rising.
Thermal radiation
Electromagnetic waves given out by every body because of its temperature, carrying heat across empty space.
Stefan-Boltzmann law
The power radiated by a surface is proportional to the fourth power of its kelvin temperature.
Wien's displacement law
The wavelength at which a hot body radiates most is inversely proportional to its temperature.
Greenhouse effect
Warming of a planet because its atmosphere passes sunlight in but absorbs part of the infrared radiation going out.
Second law of thermodynamics
Heat does not flow unaided from cold to hot; the total entropy of an isolated system never decreases.
Entropy
A measure of how widely energy is spread; a change of Q / T when heat Q enters at temperature T, or k times the logarithm of the number of arrangements.
Carnot limit
The highest efficiency any heat engine can have between two temperatures, 1 minus the cold kelvin temperature over the hot one.
Third law of thermodynamics
Absolute zero cannot be reached in a finite number of steps.

Try it in the table

  • Open the node 'Heat conduction (Fourier's law)' and read the formula. Redo the cool-box estimate in this module with 40 mm walls, and again with the 25 mm box holding 10 kg of ice. Say which change makes the ice last longer.
  • Open the node 'Gas laws'. Take a sealed bicycle tyre at 3.0 bar gauge on a 20 °C morning and find its gauge reading after it sits in 45 °C afternoon sun, using absolute pressure and kelvin. Compare with the football worked in this module.
  • Open the node 'Latent heat'. Compare the energy to warm 1 kg of water from 20 °C to 100 °C with the energy to boil that kilogram away. Then compare your ratio with the monsoon estimate in this module, where condensation gave 2.5 MJ per kg.
  • Open the nodes 'Blackbody radiation' and 'Infrared radiation'. Use peak wavelength = 2.898e-3 m K / T to find the peak for a stove ring at 900 K and for the filament in a lamp at 2,700 K, and say which part of the spectrum each falls in.
  • In the engineering course, open 'Heat and thermodynamics: engines, heat pumps and their limits'. Take the efficiency it gives for a steam plant and compare with the Carnot limit for the same steam temperature and a 300 K condenser, using 1 - Tcold / Thot.
  • In Understanding Energy, open 'The laws of energy: conservation, entropy and efficiency'. Pick one example it gives of energy of low quality, and redo the entropy ledger of this module for it with your own numbers.
  • Time how long your kettle takes to boil 1 litre of water from tap temperature, using a clock and a thermometer. Work out the heat needed as 1 x 4,186 x (100 - starting temperature) and divide by the time to get the power, then compare with the power printed on the kettle.

Final quiz

A 0.2 kg iron rod glows at 800 °C, and a 1,000 litre rooftop tank holds water at 32 °C. Why can the tank warm a room more than the rod can?

Temperature is the average energy per particle. The total energy to give up also depends on mass and specific heat: about 70 kJ for the rod cooling to 25 °C, against about 29 MJ for the tank.

Air at 27 °C (300 K) is heated until the average speed of its molecules doubles. What is its new temperature?

Average energy goes as speed squared, so doubling the speed quadruples it. Energy is proportional to kelvin temperature, so 300 K becomes 1,200 K, which is 1,200 - 273 = 927 °C.

What did Rumford's boring of cannon in 1798 show against the caloric theory?

The caloric theory said a body holds a finite stock of heat. Rumford's horses kept producing heat as long as they walked, which a finite stock could not do.

How much heat is needed to warm 2 kg of water by 10 K (specific heat 4,186 J per kg per K)?

Heat = mass x specific heat x temperature change = 2 x 4,186 x 10 = 83,720 J, about 83.7 kJ.

Which statement best explains why the south-west monsoon is a seasonal sea breeze?

Water's high specific heat and deep mixing keep the sea cooler. The land heats quickly and the pressure over it falls, so air flows from sea to land.

A 50 m steel girder (12 millionths per kelvin) is warmed by 30 K. By how much does it grow if free to move?

Growth = 12e-6 x 50 m x 30 K = 0.018 m, or 18 mm. That is why bridges have expansion joints.

A pond cools from 10 °C. When does the surface water first stop sinking and begin to stay on top?

Above about 4 °C cooling makes water denser, so it sinks. Below 4 °C further cooling makes it lighter, so it stays at the surface and freezes there.

A simple sum gives the Earth an average temperature of 255 K. It is actually 288 K. What accounts for the 33 K?

The sum counts the sunlight absorbed and the radiation the Earth must emit to balance it. Greenhouse gases return part of the outgoing infrared, raising the surface temperature.

900 J of heat flows from a body at 450 K to one at 300 K. What is the total change in entropy?

The hot body loses 900 / 450 = 2 J/K. The cold one gains 900 / 300 = 3 J/K. The net is +1 J/K, which is positive, so the flow is allowed.

A company claims an engine between steam at 600 K and surroundings at 300 K with an efficiency of 60 per cent. What do you conclude?

No heat engine can beat the Carnot limit for its two temperatures, which is 50 per cent here. A claim above it breaks the second law.
Next module: Electricity and magnetism: charges, fields and currents →

Sources for this module