Material Insights · Understanding the Material World

The solid Earth: plate tectonics, rocks and minerals: The layered Earth and how we know it

All courses / Understanding Science / Module 18: The solid Earth: plate tectonics, rocks and minerals Part 1 of 6

The layered Earth and how we know it

No drill has gone deeper than about 12 km into the Earth, yet we can say what lies 6,000 km down and how hot it is. The method is to listen. Earthquakes ring the planet like a bell, and the way the sound travels reveals what it passed through.

1.1 A young, molten Earth sorted itself by density into crust, mantle and core

Stir a spoonful of river mud into a glass of water and leave it. Sand settles first, then silt, with cloudy water above: in a fluid, heavy particles sink and light ones stay up. The young Earth sorted itself in a similar way. It formed about 4.54 billion years ago from colliding rocky bodies, and the heat of those impacts, of radioactive decay and of the sinking itself kept much of it molten. Iron, the densest common material, drained towards the centre and left lighter silicate rock above. This sorting by density is called differentiation, and it is why Earth has layers of different composition.

The centre is the core, mostly iron with some nickel, about 3,480 km in radius and making up about one sixth of the volume but nearly a third of the mass. Around it lies the mantle, a thick shell of rock rich in iron and magnesium silicates, about 2,900 km thick. On top is the crust, a skin of lighter rock. Oceanic crust is dark basalt, only 5 to 10 km thick. Continental crust is lighter, granite-like rock, usually 30 to 50 km thick and up to about 70 km under Tibet. The boundary between crust and mantle is the Moho, named after Andrija Mohorovicic, who in 1909 saw a Croatian earthquake arrive at stations by two paths: a direct one, and a faster one that had dived into the denser mantle.

The average density of Earth is 5.5 grams per cubic centimetre, but surface rocks are only 2.7 to 3.0. Something much denser must lie below. Weighing the Earth, from the pull of gravity, was the first clue to the core.

Data Earth's compositional layers, in round numbers
LayerDepth rangeMain materialDensity (g per cubic cm)
Oceanic crust0 to 5 or 10 kmBasalt and gabbroAbout 3.0
Continental crust0 to 30 or 50 km (70 under Tibet)Granite-like rocksAbout 2.7
MantleMoho to 2,900 kmIron and magnesium silicates (peridotite)3.3 at the top to about 5.5
Core2,900 to 6,371 kmIron with nickel and some lighter elementsAbout 10 to 13

The average over the whole Earth is 5.5. Surface rock cannot give that figure, so the deep interior must be far denser.

Source: Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013), ch. 22, 'Plate Tectonics'; Standard reference values used for the paper estimates (Britannica and USGS general articles on Earth's structure, mineral properties and earthquake magnitude), layer depths and densities, P and S wave speeds, Mohs numbers and specific gravities, the energy factor of about 31.6 per magnitude unit, the half-lives of potassium-40 (1.25 billion years), uranium-238 (4.47 billion years) and carbon-14 (5,730 years)
  • Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 22, 'Plate Tectonics'
  • Standard reference values used for the paper estimates (Britannica and USGS general articles on Earth's structure, mineral properties and earthquake magnitude) · layer depths and densities, P and S wave speeds, Mohs numbers and specific gravities, the energy factor of about 31.6 per magnitude unit, the half-lives of potassium-40 (1.25 billion years), uranium-238 (4.47 billion years) and carbon-14 (5,730 years)

1.2 Earthquake waves carry news of the interior, and a shadow showed the core

An earthquake sends out several kinds of wave. Two travel through the body of the planet, and module 7 explained the difference: P waves squeeze and stretch the rock along their path and cross solids and liquids, while S waves shear it sideways and cannot cross a liquid. Slower surface waves, named after Rayleigh and Love, arrive last and do most of the damage to buildings. P waves are fastest, about 6 km a second in the crust and 8 to 13 km a second in the mantle, and S waves go at a little under 60 per cent of that. The gap between the two arrivals therefore grows with distance: in the crust each second of lag means about 8 km (calculated from 6 and 3.5 km a second).

Waves bend and change speed where the rock changes, so arrival times at many stations, such as those of India's National Center for Seismology, can be turned into a map of wave speed with depth. In 1906 Richard Oldham found that P waves crossing the deep interior arrived late, and inferred a core that slows them. In 1913 Beno Gutenberg placed the core's edge at about 2,900 km. Direct S waves never appear more than about 103 degrees from the source, and in 1926 Harold Jeffreys used this and other evidence to argue that the core is liquid.

Direct P waves are missing too, between about 104 and 140 degrees, because the core bends them away. In 1936 the Danish seismologist Inge Lehmann noticed faint P arrivals inside this shadow. A wholly liquid core could not send them there, so she proposed a solid inner core whose edge turns waves back. Measurements in 1971 of the whole Earth ringing after great earthquakes confirmed it.

Data Worked estimate: how long does a P wave take to cross the Earth?
StepValue
Diameter of Earth12,742 km
Average P wave speed along a path through the centreAbout 10.5 km a second
Time = distance / speed12,742 km / 10.5 km per s = about 1,210 s (calculated)
In minutes1,210 s / 60 s per minute = about 20 minutes (calculated)
CheckRecorded travel times to the opposite side of the world are close to 20 minutes

The speed is an average over layers, slower in crust and fastest in the inner part of the mantle. A large quake is therefore recorded across the whole globe within about twenty minutes.

Source: Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013), ch. 22, 'Plate Tectonics'; Standard reference values used for the paper estimates (Britannica and USGS general articles on Earth's structure, mineral properties and earthquake magnitude), layer depths and densities, P and S wave speeds, Mohs numbers and specific gravities, the energy factor of about 31.6 per magnitude unit, the half-lives of potassium-40 (1.25 billion years), uranium-238 (4.47 billion years) and carbon-14 (5,730 years)
  • Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 22, 'Plate Tectonics'
  • EARTH Magazine, March 29, 1936: notes on Earth's inner core · web
  • Material Insights science nodes 'Stratigraphy' and 'Seismic waves', and the modules 'The nucleus' and 'Evolution and the diversity of life' · Steno 1669; Smith about 1800; Holmes 1913; Gutenberg's core depth 1913; Jeffreys 1926; zircons from Western Australia older than 4.3 billion years
  • Standard reference values used for the paper estimates (Britannica and USGS general articles on Earth's structure, mineral properties and earthquake magnitude) · layer depths and densities, P and S wave speeds, Mohs numbers and specific gravities, the energy factor of about 31.6 per magnitude unit, the half-lives of potassium-40 (1.25 billion years), uranium-238 (4.47 billion years) and carbon-14 (5,730 years)

1.3 The layers by strength and state, and the dynamo in the liquid core

Composition is one way to cut the Earth. Another is by how strongly the material resists flow, which depends on temperature and pressure as much as on the type of rock. By this reckoning the top layer is the lithosphere, the cool and rigid shell made of the crust and the uppermost mantle, about 100 km thick on average. Below it is the asthenosphere, the part of the mantle that is hot and weak enough to creep slowly, though it is not a liquid. Deeper the mantle becomes stiffer again under pressure. Then the outer core is liquid iron about 2,260 km thick, and at the centre the inner core, about 1,220 km in radius, is solid despite temperatures of roughly 5,000 degrees Celsius, because the pressure of millions of atmospheres squeezes the atoms into a solid.

The rigid lithosphere is broken into plates, and the plates ride on the weak asthenosphere. A plate is therefore crust and upper mantle moving as one.

The liquid outer core also makes the magnetic field. Module 6 explained the geodynamo: heat leaving the core stirs the molten iron, Earth's spin organises the flow, and the moving metal sustains the electric currents that sustain the field (see the node 'Earth's magnetic field'). The field reaches far into space and turns aside most of the charged particles streaming from the Sun. It also reverses from time to time, and that fact becomes the key to seafloor spreading in Part 4.

Data Earth's structural layers, from the surface inward
LayerDepthStateRole
Lithosphere0 to about 100 kmRigidBroken into the plates
AsthenosphereAbout 100 to 350 kmHot, weak, creepsLets the plates glide
Deeper mantleAbout 350 to 2,900 kmSolid, stiff under pressureSlow convection
Outer core2,900 to 5,150 kmLiquid ironGenerates the magnetic field
Inner core5,150 to 6,371 kmSolid ironGrows slowly as the core cools
Source: Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013), ch. 22, 'Plate Tectonics'; Standard reference values used for the paper estimates (Britannica and USGS general articles on Earth's structure, mineral properties and earthquake magnitude), layer depths and densities, P and S wave speeds, Mohs numbers and specific gravities, the energy factor of about 31.6 per magnitude unit, the half-lives of potassium-40 (1.25 billion years), uranium-238 (4.47 billion years) and carbon-14 (5,730 years)
  • Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 22, 'Plate Tectonics'
  • Standard reference values used for the paper estimates (Britannica and USGS general articles on Earth's structure, mineral properties and earthquake magnitude) · layer depths and densities, P and S wave speeds, Mohs numbers and specific gravities, the energy factor of about 31.6 per magnitude unit, the half-lives of potassium-40 (1.25 billion years), uranium-238 (4.47 billion years) and carbon-14 (5,730 years)

See it in the table

H₂O WaterNi NickelMg Magnesium

Check your understanding

S waves from an earthquake are not detected on the far side of the Earth. What does this show?

S waves need a material that resists shear, which a liquid cannot do. Since the mantle passes S waves, the stopping must occur in the core, and the outer core is liquid.

A station records P and S arrivals 25 seconds apart. Using about 8 km of distance per second of lag, how far away is the quake?

Distance is about 25 x 8 = 200 km. The lag grows with distance because the faster P wave pulls further ahead.

What did Inge Lehmann deduce in 1936?

P-wave energy inside the shadow zone could not come from a wholly liquid core. A solid inner core that bends waves explains it.
← Module contentsMark read · Part 2: Minerals: the building blocks of rock →