Material Insights · Understanding the Material World

The solid Earth: plate tectonics, rocks and minerals: Plate tectonics at work: boundaries, earthquakes and volcanoes

All courses / Understanding Science / Module 18: The solid Earth: plate tectonics, rocks and minerals Part 5 of 6

Plate tectonics at work: boundaries, earthquakes and volcanoes

Once the surface is seen as a mosaic of moving plates, scattered facts fall into line. Earthquakes and volcanoes are not spread evenly over the globe: they follow narrow belts. India, on a plate with a very active northern edge and a quiet interior, has both kinds of experience.

5.1 The lithosphere is cut into plates that move at the speed of growing fingernails

Plate tectonics is the theory that the rigid lithosphere is broken into about a dozen major plates and several smaller ones, which move over the weaker asthenosphere. A plate may carry continent, ocean floor or both. The Indian plate carries peninsular India and part of the Indian Ocean. The Pacific plate is almost wholly ocean. Most of the action, the earthquakes, volcanoes and mountain building, takes place at the edges of plates, while the interiors are comparatively calm.

The speeds are small. The USGS gives about 2.5 cm a year for the Mid-Atlantic Ridge, about 5 cm a year for the Pacific plate sliding past North America along the San Andreas fault, and more than 15 cm a year for the fastest ridge, the East Pacific Rise. A fingernail grows about 3 to 4 cm in a year, so most plates move at about the pace of fingernails. GPS stations fixed to rock now measure these motions directly, and agree closely with the rates read from the seafloor over millions of years.

What moves them? The main driver is the weight of old, cold ocean plate sinking at a trench, called slab pull, which tugs the rest of the plate along behind. A smaller push comes from the raised ridge, from which the new plate slides down and away: ridge push. Both belong to the slow convection of the mantle, in which hot material rises and cool material sinks over tens of millions of years. Plates that are attached to long sinking slabs, such as the Pacific, tend to be the fastest.

Data Worked estimate: how far does a plate go?
CaseSpeedTimeDistance = speed x time
Pacific past California5 cm a year = 50 km per million years1 million years50 km (calculated)
Pacific past California5 cm a year30 million years1,500 km (calculated)
Mid-Atlantic opening2.5 cm a year10 million years250 km (calculated)
A fingernail for comparison3.5 cm a year10 yearsAbout 35 cm (calculated)

5 cm a year is 50 km in a million years. Geological time makes slow speeds add up to the width of oceans.

Source: Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013), ch. 22, 'Plate Tectonics'; US Geological Survey, This Dynamic Earth: The Story of Plate Tectonics (Understanding Plate Motions), https://pubs.usgs.gov/gip/dynamic/understanding.html (Mid-Atlantic Ridge spreading about 2.5 cm a year; East Pacific Rise more than 15 cm a year; Arctic Ridge under 2.5 cm a year; Pacific Plate past North America about 5 cm a year; most Himalayan growth in the past 10 million years)

5.2 Plates meet in three ways, and each way builds its own scenery

Where two plates move apart it is a divergent boundary. On the ocean floor this is the mid-ocean ridge. On land it is a rift, such as the East African Rift; the Red Sea shows a later stage. Where plates move toward each other it is a convergent boundary, and the result depends on what is colliding. When ocean meets continent, the denser ocean plate dives beneath, forming a trench and, on the overriding plate, a line of volcanoes, like the Andes. When ocean meets ocean, one plate sinks and an arc of volcanic islands forms behind the trench, as with the Andaman and Nicobar islands and Sumatra. When continent meets continent, the light crust cannot sink, so it crumples and thickens into a range such as the Himalaya. Where plates slide past one another it is a transform boundary. Most transform faults join offset pieces of the mid-ocean ridge; the San Andreas fault is a rare one on land. No crust is made or lost, but the rubbing builds up strain.

A fourth case lies in the middle of plates: hotspots. A narrow plume of hot rock rises from deep in the mantle and melts through the plate above, and as the plate moves the volcano is carried away from its source and a new one grows. The Hawaiian chain traces this, and so does the Reunion hotspot, which is linked in Part 6 to the Deccan Traps.

Ridges also host life that does not use sunlight. In 1977 the submersible Alvin found hot-water vents on the Galapagos ridge crowded with tube worms and clams. Bacteria there draw energy from chemicals such as hydrogen sulphide, and the animals feed on or host them: a food chain run on Earth's chemistry rather than the sunlight of module 17.

Data The three plate boundaries and what each makes
BoundaryPlate motionLandformsExample
DivergentApartMid-ocean ridge, rift valley, new basaltMid-Atlantic Ridge; East African Rift
Convergent: ocean and continentOcean plate dives underTrench, volcanic mountain chainAndes
Convergent: ocean and oceanOne plate dives underTrench, volcanic island arcAndaman and Nicobar arc, Sumatra
Convergent: continent and continentBoth crumpleHuge fold and thrust mountain rangeHimalaya
TransformSlide pastLong fault, offset ridgesSan Andreas fault
Source: Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013), ch. 22, 'Plate Tectonics'
  • Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 22, 'Plate Tectonics'
  • Standard geological background, checked against general references and not fetched in this session · Makrana marble of Rajasthan is metamorphosed limestone; India's Gondwana coals in the Damodar, Mahanadi and Godavari valleys are of Permian age; the submersible Alvin found the Galapagos Rift vents in 1977; Tharp and Heezen mapped the Atlantic floor in the 1950s; about 1,300 volcanoes have erupted in the Holocene, most of them around the Pacific

5.3 Earthquakes are rock snapping back after strain, and India has two kinds

Plates do not slide smoothly. Rough faces catch on one another, and the rock on both sides bends elastically and stores energy while the plates keep moving, the grip and slip that module 2 described for friction. When the strain exceeds the strength of the fault, the rock slips suddenly and springs back, and the stored energy leaves as waves. This is the elastic rebound idea, worked out after the 1906 San Francisco earthquake. The point underground where slip starts is the focus, and the point directly above it is the epicentre. Most large earthquakes are on plate boundaries.

Magnitude measures the energy. Each whole unit increases the shaking amplitude 10 times and the energy about 32 times. Intensity is a separate measure of how strongly a place shook, which depends on distance, ground and buildings.

India has two kinds. The first are plate-boundary earthquakes along the Himalayan arc, where the Indian plate slides under Asia, and in the Andaman and Nicobar islands, where it sinks beneath the Burma plate. The Sumatra-Andaman earthquake of 26 December 2004 was magnitude 9.1; it broke about 1,200 km of the boundary in some 8 minutes, and the lifted sea floor launched the Indian Ocean tsunami (USGS). The magnitude 7.8 Gorkha earthquake in Nepal on 25 April 2015 slipped on the Main Himalayan Thrust beneath the range. The second kind are intraplate earthquakes on old faults in the peninsula. Latur (Killari) in 1993 was magnitude 6.4 and killed 7,928 people. Bhuj in 2001 was magnitude 7.7 and killed 13,805. India's earthquake design code, IS 1893 in its 2016 edition, divides the country into seismic zones II to V, with V the most hazardous, covering the Himalayan belt, the north-east, Kutch and the Andaman and Nicobar islands. A 2025 revision that added a sixth zone was reported in March 2026 to have been withdrawn after concerns over building costs. Earthquakes cannot be predicted in time, only mapped for hazard and built against.

Data Two Indian earthquakes, from the Earthquake Tips series
Latur (Killari)Bhuj
Date30 September 199326 January 2001
Local time03:5308:46
Magnitude6.47.7
Maximum intensityIXX
Deaths7,92813,805
SettingIntraplate, peninsular IndiaIntraplate, Kutch rift basin

Energy ratio = 10 to the power of (1.5 x magnitude difference) = 10 to the power 1.95, about 90 (calculated).

Source: Delhi Disaster Management Authority / BMTPC, Earthquake Tip 4 (IITK-BMTPC series), https://ddma.delhi.gov.in/sites/default/files/ddma/EQT/eqtip04.pdf (Killari (Latur), 30 September 1993, 03:53, M6.4, intensity IX, 7,928 dead; Bhuj, 26 January 2001, 08:46, M7.7, intensity X, 13,805 dead; casualties depend strongly on the time of day; zones II to V since the 2002 map); Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013), ch. 22, 'Plate Tectonics'

5.4 Volcanoes cluster where plates sink, where they part and over hotspots

About 1,300 volcanoes have erupted in the last 10,000 years, and most sit along plate edges. The Pacific Ring of Fire, a belt of subduction zones, holds about three quarters of them. How does a cold sinking plate cause melting? The plate carries water in its minerals. As it sinks and heats up, it releases water into the hot mantle wedge above, and water loosens the bonds in hot rock and lowers its melting point by hundreds of degrees. The mantle melts, and the melt, lighter than the solid around it, rises to feed the volcanoes. At ridges, the rising mantle melts because the pressure falls. At hotspots, a hot plume melts as it rises. In none of the three is rock simply heated to its melting point.

The magma sets the style. Basaltic magma is runny and loses gas easily, and gives gentle lava flows and broad shield volcanoes. Silica-rich magma is sticky and traps gas, and may explode, throwing ash for kilometres and giving steep cones.

Barren Island in the Andaman Sea, on the arc built by the Indian plate sinking under the Burma plate, is India's only confirmed active volcano: a 354 m island atop a cone rising from about 2,250 m below the sea. An eruption in 1991 ended more than 200 years of quiet, and it has erupted repeatedly since, including in 2017 (Smithsonian Global Volcanism Program). The Geological Survey of India visited it in May 1995 during an eruption in which a lava flow advanced about 2 m an hour. India's great volcanic episode, the Deccan Traps, lies in the past and in Part 6.

See it in the table

H₂O WaterH2 Hydrogen

Check your understanding

A plate moves at 4 cm a year. How far does it move in 25 million years?

4 cm a year is 40 km per million years. Multiply by 25 to get 1,000 km.

Why does a cold, sinking ocean plate lead to volcanoes above it?

The water driven off the sinking slab lets the mantle wedge melt at lower temperature. The melt rises to feed the arc.

Latur in 1993 (M6.4) and Bhuj in 2001 (M7.7) were both intraplate quakes. About how many times more energy did Bhuj release?

The energy ratio is 10 to the power 1.5 x 1.3, about 10 to the power 1.95, or about 90.
← Part 4: From drifting continents to spreading seafloorsMark read · Part 6: India's journey, the Deccan Traps, mountains and ores →