Aluminium can: Interventions
Try this in What if Switch on levers and see what changes in India by 2036.
Interventions
Changes that would cut emissions or material use, by lever and life stage, with effect per unit, readiness, adoption, evidence and who acts
| Lever | Life stage | Change | Effect per unit | Readiness | Adoption | Who acts | Source |
|---|---|---|---|---|---|---|---|
| Circularity | End of life | Raise collection with deposit return and better sorting | Each extra percentage point of end-of-life recycling cuts 1.02 kg CO2e per 1,000 North American cans, cradle to grave [5], about 0.9 g per 330 ml can (calculated: 1.02 g x 12 / 13.46) | Deployed | US consumer rate 43.0% (2023), EU 76.3% (2023), Brazil 97.3% | Governments, bottlers, retailers | [5][12][4][7][1] |
| Circularity | Making | Raise the recycled share of can sheet | Each extra percentage point of recycled content cuts 1.43 kg CO2e per 1,000 North American cans, cradle to gate [5], about 1.3 g per 330 ml can (calculated: 1.43 g x 12 / 13.46) | Deployed | 71% in the US (2023); Ball average 74% (2024) | Rolling mills, can makers | [5][12][4][17] |
| Change route | Supply chain | Buy low-carbon primary aluminium | Primary metal is the largest source of a can's footprint; a Chinese-only primary can is at least 4 times the typical North American can [5]; global primary average 14.8 t CO2e per t in 2023 [8] | Deployed in part | Not stated | Smelters, can sheet buyers | [5][8] |
| Use less | Components design | Lighter bodies and smaller ends | New can ends use 10% less material than standard ends [24]; a 330 ml can is about 12 g [12] against more than 80 g for the first beverage can [24] | Deployed | Standard in new designs | Can makers, bottlers | [24][12] |
| Substitute | Components design | Swap cans for PET in single-serve water and soft drinks | A 16.9 oz PET bottle had 74% lower global warming potential than a 12 oz can in one US study [32]; where cans are recycled at 97% they led in Ball's Brazil study [1] | Deployed | Not stated | Bottlers, retailers | [32][1] |
| Circularity | End of life | Close the global can recycling gap by 2030 | Effective global recycling of used cans could save 60 million tonnes of CO2e a year by 2030 [10] | Piloted | 75% global rate in 2023 | Governments, industry alliance | [10][2] |
| Circularity | Supply chain | Use recycled-content rules in India's non-ferrous EPR | Minimum recycled content in aluminium products reaches only 10% by 2031-32 [16] | Deployed by rule | In force from 1 April 2026 | Producers, CPCB | [16] |
as of 2026-11-16
Sources
- Beverage packaging – A Comparative Life Cycle Assessment Sphera for Ball Corporation, 2020
- Global aluminium can recycling reaches 75%, marking major step toward circular economy International Aluminium Institute, 2025
- The Aluminum Can Advantage: Sustainability Key Performance Indicators Aluminum Association and Can Manufacturers Institute, 2024
- Aluminum Can Life Cycle Assessment Report Overview The Aluminum Association, 2021
- Aluminium beverage can recycling reaches a new record European Aluminium and Metal Packaging Europe, 2026
- Global Aluminium Industry Greenhouse Gas Emissions Intensity Reduction Continues, With Total Emissions Below 2020 Peak International Aluminium Institute, 2024
- New IAI study reveals environmental benefits of increased global aluminium can recycling International Aluminium Institute (PR Newswire), 2023
- Life Cycle Assessment of Metal Packaging in Europe: executive summary Metal Packaging Europe, 2022
- India's new EPR framework for non-ferrous metals: Strong foundation, modest ambition Down To Earth, 2025
- Ball Corporation Form 10-K for the fiscal year ended December 31, 2025 Ball Corporation, 2026
- Lightweight (Alustory: packaging) International Aluminium Institute (Alustory)
- PET Plastic Bottles Have A Significantly Lower Environmental Impact Compared to Glass Bottles and Aluminum Cans NAPCOR, 2023