Material Insights · Understanding the Material World

Aluminium can: Working

What it is

The product and the job it does, in a short paragraph

An aluminium can is a thin, sealed metal container for drinks, made in two pieces: a drawn and ironed body and a separate lid, called the end [23]. It holds beer, soft drinks, energy drinks and water. The functional unit is one 330 ml drinks can, which weighs about 12 g on the European average [12]; other sources give about 13 g [24]. Scope: new drinks cans. HS 7612.90 is wider than drinks cans: it covers any aluminium cask, drum, can or box of up to 300 litres, so trade data overstate drinks cans. Food cans, aerosols, tubes and steel cans are left out.

as of 2026-11-16

How it works

How it does its job, step by step in plain words

The can is a thin pressure vessel. The body is a single piece of aluminium alloy sheet, first stamped into a shallow cup, then pushed past ironing rings that stretch and thin the wall to about 0.11 mm over most of its height [23]. The base is then pressed against a dome [23], a shape that stiffens it against the pressure of a fizzy drink. The top is narrowed, called necking, so that the lid fits after filling [6]. The lid is a different alloy, with less manganese and more magnesium than the body [23][22]. The inside coating separates the metal from the drink [6], and the outside carries the printed design [6]. Aluminium forms a thin oxide skin that protects the metal from corrosion.

as of 2026-11-16

Key specifications

The numbers that describe it, each with unit, variant, year and source

SpecValueUnitVariantYearSource
Average weight of a 330 ml aluminium drinks can, European study12g– 2018[12]
Mass of a 330 ml aluminium drinks can, other sources13g (about)– – [24][22]
Body (container) weight of a 0.33 L aluminium can, Ball comparative study, Europe9.43g– 2018[1]
End (lid) weight of the same 0.33 L can2.44g– 2018[1]
Metal weight of an average North American can of 13.6 fluid ounces (about 402 ml, calculated)12.99gAverage can2016[5][6]
Wall thickness over most of the body, after ironing0.11mm– – [23]
Thickness of the starting sheet strip0.3mm– – [23][33]
Share of can mass in the lid25% (up to)– – [23]
Cans per tonne of 12 g cans (calculated)83,333cans per tonne– 2018[12]
Climate impact of a 330 ml can from raw material to end of life, Europe61g CO2e per canAverage can2018[12]

as of 2026-11-16. Mass depends on size: Metal Packaging Europe lists 10 g for 250 ml and 15 g for 500 ml cans [12]. The Ball table, read from extracted text, gives 9.43 g for the 0.33 L body and 2.44 g for its end, about 11.9 g in all (calculated), so the lid is about 21% of the can (calculated) [1]; this agrees with the 12 g European average [12].

Variants

The variants whose make-up or footprint differs a lot, what defines each and its share of units

VariantDefining specYearSource
Primary canBody and lid from new aluminium only (0% recycled metal); about 0.16 kg CO2e cradle to gate per 330 ml can (calculated)2016[5][6][12]
Average canToday's mix: 73% recycled metal in the North American study (2016 data), 71% in US cans (production year 2022); about 0.069 kg CO2e cradle to gate and 0.086 kg cradle to grave per 330 ml can (calculated)2016[5][6][4][12]
Recycled canBody and lid from recycled metal only (100%); about 0.034 kg CO2e cradle to gate per 330 ml can (calculated)2016[5][6][12]

as of 2026-11-16. No source gives the share of cans sold by variant. Values are scaled from the 13.46 g North American can [6] to a 12 g, 330 ml can [12] by mass (factor 0.891, calculated). The primary and recycled cases extend the published effect of 1.43 kg CO2e per 1,000 cans for each percentage point of recycled content [5] in a straight line from 73% to 0% and 100%: (77.1 + 73 x 1.43) kg = 181.5 kg and (77.1 minus 27 x 1.43) kg = 38.5 kg per 1,000 North American cans (calculated). The study does not publish these end points, so they are indicative; real cans are blends.

Limits

The physical limits set by science and the engineering limits of today's design, with today's value

LimitKindTodayUnitSource
Wall thickness of the ironed bodyEngineering0.11mm; no source gives a minimum[23]
Recycled metal in can ends (high-magnesium end alloy)Engineering3% scrap input in European ends, 2018 data, against 55% recycled content in bodies[1]
Highest national can recycling rateEngineering99% in Japan in the 2023 Eunomia study, as stated by UACJ; Brazil 98% over 15 years, as stated by Ball[2]
Energy of remelting against smelting new metalEngineering5% of the energy of primary production used by recycling[10]

as of 2026-11-16

Science it relies on

The science principles it works by or is limited by

Relies on Limited by
  • Gas laws The gas pressure of a fizzy drink presses on the thin wall and the dome and sets the minimum wall.

as of 2026-11-16

Sources

  1. Beverage packaging – A Comparative Life Cycle Assessment Sphera for Ball Corporation, 2020
  2. Global aluminium can recycling reaches 75%, marking major step toward circular economy International Aluminium Institute, 2025
  3. The Aluminum Can Advantage: Sustainability Key Performance Indicators Aluminum Association and Can Manufacturers Institute, 2024
  4. Aluminum Can Life Cycle Assessment Report Overview The Aluminum Association, 2021
  5. Life Cycle Assessment of North American Aluminum Cans Sphera for The Aluminum Association, 2021
  6. New IAI study reveals environmental benefits of increased global aluminium can recycling International Aluminium Institute (PR Newswire), 2023
  7. Life Cycle Assessment of Metal Packaging in Europe: executive summary Metal Packaging Europe, 2022
  8. Sheet aluminum alloys for cans and cars The Fabricator
  9. An aluminium beverage can Aluminium Guide, 2020
  10. Lightweight (Alustory: packaging) International Aluminium Institute (Alustory)
  11. The Comeback of the Aluminum Can, Part 2 ASME, 2018