Material Insights · Understanding the Material World

Aluminium can: Footprint

Raw materials in one unit

Every commodity and chemical inside one unit, traced through its components by the site, with its emission factor and emissions

VariantMaterialAmount (kg)Emission factor (kg CO2e per kg)Emissions (kg CO2e)
PrimaryAluminium0.01114.80.2
PrimaryPaints and coatings0– –
PrimaryMagnesium0– –
PrimaryManganese0– –
AverageAluminium0.01114.80.2
AveragePaints and coatings0– –
AverageMagnesium0– –
AverageManganese0– –
RecycledAluminium0.01114.80.2
RecycledPaints and coatings0– –
RecycledMagnesium0– –
RecycledManganese0– –

Worked out from data

The site's estimate

Emissions of one unit worked out by the site from its materials and energy, for the world and India, with the share of mass covered by emission factors

VariantStagePlaceEmissions (kg CO2e)Mass covered by factors
PrimaryMakingWorld0.16794%
PrimaryUseWorld– –
PrimaryMakingIndia0.16794%
PrimaryUseIndia– –
AverageMakingWorld0.2794%
AverageUseWorld– –
AverageMakingIndia0.27994%
AverageUseIndia– –
RecycledMakingWorld0.16794%
RecycledUseWorld– –
RecycledMakingIndia0.16794%
RecycledUseIndia– –

Worked out from data

Energy to make it

Energy used to make one unit, by carrier and stage

Energy to make
  • El Electricity 0.043 kWh · Materials Average can Calculated: smelting electricity of 14.1 MWh per tonne (14.1 kWh per kg) of aluminium on the global average [28] times the primary share, 26.6% of 11.58 g of metal, or 3.08 g [6][12]. Excludes refining, rolling and can making; the 14.1 MWh figure has no stated year.
  • Ht Heat 1.18 MJ · Materials Average can Calculated: cradle-to-gate primary energy of 1,320 MJ per 1,000 North American cans of 13.46 kg, all carriers, from ore to finished can [6], scaled to a 12 g can [12]. It includes the smelting electricity above, so the two rows must not be added. Cradle to grave, including end-of-life processing and the debit for replacement metal, the study gives 1,630 MJ per 1,000 cans, about 1.45 MJ per 330 ml can (calculated) [6].

Indicative · as of 2026-11-16

Emissions by stage

Published life-cycle emissions of one unit in four stages (making, logistics, use, end of life), with their split, place and variant

StageValueUnitShareVariantPlaceYearSource
Making0.13kg CO2e per 330 ml can (12 g): raw materials and transport 113 g, can manufacturing 15 g, secondary and tertiary packaging 2 g (calculated sum)213.1Average canEurope2018[12]
Logistics0.006kg CO2e per 330 ml can: transport to fillers9.8Average canEurope2018[12]
Use0kg CO2e per can: the study has no use stage, as the can uses no energy (chilling belongs to the drink)0Average canEurope2018[12]
End of life-0.075kg CO2e per 330 ml can: recycling and disposal, a net credit for recycled metal at a 76% recycling rate; total of all stages 61 g; shares calculated-123Average canEurope2018[12]
Making0.069kg CO2e per 330 ml can, cradle to gate (calculated: 77.1 g per 13.46 g North American can as published, times 12 / 13.46)79.6Average canNorth America2016[5][6][12]
End of life0.018kg CO2e per 330 ml can: end-of-life processing 20.9 g less a credit of 1.22 g per North American can, so 96.8 less 77.1 g, scaled to 12 g (calculated)20.4Average canNorth America2016[6][12]
Making0.162kg CO2e per 330 ml can, cradle to gate, 0% recycled metal (calculated: (77.1 + 73 x 1.43) g = 181.5 g per North American can, times 12 / 13.46)– Primary canNorth America2016[5][6][12]
Making0.034kg CO2e per 330 ml can, cradle to gate, 100% recycled metal (calculated: (77.1 minus 27 x 1.43) g = 38.5 g per North American can, times 12 / 13.46)– Recycled canNorth America2016[5][6][12]

Indicative · as of 2026-11-16. Two studies with different methods: Metal Packaging Europe credits recycled metal at end of life [12]; the North American study counts recycled content at the making stage [6]. Neither gives use or a separate logistics figure for North America. North American values are scaled by can mass from the 13.46 g, 13.6 fluid ounce can to the 12 g, 330 ml unit. By stage, per 1,000 North American cans: primary ingot 38.4 kg, re-melting 8.17, sheet rolling 7.19, can making 23.4 (cradle to gate) [6]. The primary and recycled rows extend the published 1.43 kg per 1,000 cans for each point of recycled content [5] in a straight line; the study does not publish these end points, so they are indicative. A can made only from Chinese primary metal is at least 4 times as carbon intensive as the average North American can [5].

End of life

What happens to a unit when it is thrown away: collection, reuse, recycling and disposal shares, by place

RouteSharePlaceYearSource
Recycled, aluminium drinks cans (all collection routes)75World2023[2][3]
Recycled, aluminium drinks cans76.3EU, UK, Switzerland, Norway and Iceland2023[7][35]
Consumer recycling rate, aluminium drinks cans43United States2023[4]
Industry recycling rate, aluminium drinks cans57United States2023[4]
Collected for recycling, more than 85%: from a TERI study commissioned by Ball; the company's claim, not an independent national count85India2022[13][40]
Collected for recycling in Ball's study (Brazil); 98% average for 15 years97.3Brazil2018[1][2]
Recycling rate in the 2023 Eunomia study, as stated by UACJ (Japan)99Japan2023[2]
Recycled, PET bottles for comparison47World2023[3]

as of 2026-11-16

Recovered as

The commodities and chemicals recovered at end of life, with recovery rates

Recovered as
  • Al Aluminium 75% recovered · Remelting of used cans into new alloy and can sheet World can recycling rate in 2023 [2]. Recycled metal needs 5% of the energy of primary metal [10], and recycling one average North American can saves about 1.56 MJ [5]. Magnesium and manganese in the alloy are not recovered separately. Recycled aluminium emitted about 0.52 t CO2e per t gate to gate, against 15.1 t for global primary aluminium from mine to cast house in 2022 [9]; the comparison leaves out emissions embodied in the scrap [9].

as of 2026-11-16

End of life in India

Collection and recycling in India, including the informal sector

In India, Ball says more than 85% of aluminium cans are collected for recycling, a figure from a TERI study that Ball commissioned [13][40]; it is a company claim, not a national count. Critics warn that informal recyclers risk being sidelined [16]. Extended producer responsibility for non-ferrous metals, which names beverage cans, is in force from April 2026, with minimum recycled content for aluminium reaching 10% by 2031-32 [16]. Recycling needs about 95% less energy than new metal [9].

as of 2026-11-16

Sources

  1. Beverage packaging – A Comparative Life Cycle Assessment Sphera for Ball Corporation, 2020
  2. Global aluminium can recycling reaches 75%, marking major step toward circular economy International Aluminium Institute, 2025
  3. Aluminum beverage can recycling rate hit 75% globally: report Packaging Dive, 2025
  4. The Aluminum Can Advantage: Sustainability Key Performance Indicators Aluminum Association and Can Manufacturers Institute, 2024
  5. Aluminum Can Life Cycle Assessment Report Overview The Aluminum Association, 2021
  6. Life Cycle Assessment of North American Aluminum Cans Sphera for The Aluminum Association, 2021
  7. Aluminium beverage can recycling reaches a new record European Aluminium and Metal Packaging Europe, 2026
  8. Aluminium recycling reduces greenhouse gas emissions by over 90% (factsheet) International Aluminium Institute
  9. New IAI study reveals environmental benefits of increased global aluminium can recycling International Aluminium Institute (PR Newswire), 2023
  10. Life Cycle Assessment of Metal Packaging in Europe: executive summary Metal Packaging Europe, 2022
  11. India: LCA study reflects aluminium beverage cans' sustainability performance ranks higher than other containers alCircle, 2022
  12. India's new EPR framework for non-ferrous metals: Strong foundation, modest ambition Down To Earth, 2025
  13. Factsheet: Aluminium smelting with use of low-carbon electricity GIZ, 2025
  14. Aluminium Europe and Metal Packaging Europe report 76% recycling rate for aluminium cans Packaging Europe, 2026
  15. Life Cycle Assessment (LCA) study in India reveals that aluminium beverage cans have superior environmental performance over glass, PET and multi-layer drinks containers The Energy and Resources Institute (TERI), 2022